MowerFacts
Home › Australia › Compare

Compare Mowers

Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Cox Compact ZTR 35 35 in — residential: typical home lawns; 35-inch deck; gas powered
  • Ariens EDGE 34 BRIGGS — residential: typical home lawns; 34-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. Compact ZTR 35 35 in holds 18 L (4.8 gal) of fuel; EDGE 34 BRIGGS holds 7.6 L (2 gal) of fuel, a 10.4 L difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  2. Compact ZTR 35 35 in has a Hydro-Gear ZT-2200 transmission; EDGE 34 BRIGGS has a Hydrostatic transmission. The transmission grade tracks duty rating and speed. Grade names are each maker's own and are not comparable across brands.
  3. Compact ZTR 35 35 in has a 24 hp engine; EDGE 34 BRIGGS has a 20 hp engine, a 4 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
  4. Compact ZTR 35 35 in has a published top speed of 5 mph; EDGE 34 BRIGGS has a published top speed of 6 mph, a 1 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  5. Compact ZTR 35 35 in lists at A$7,999; EDGE 34 BRIGGS lists at A$7,499, a A$500 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
3 more differences, calculated figures and what isn’t comparable

Other verified differences

  • Compact ZTR 35 35 in has a 889 mm (35 in) deck; EDGE 34 BRIGGS has a 864 mm (34 in) deck, a 25 mm difference.
  • Compact ZTR 35 35 in cuts from 20 mm (0.8 in) to 100 mm (3.9 in); EDGE 34 BRIGGS cuts from 38 mm (1.5 in) to 114 mm (4.5 in).
  • Compact ZTR 35 35 in has a 679 cc (41.4 ci) engine; EDGE 34 BRIGGS has a 656 cc (40 ci) engine, a 23 cc difference.

Calculated by MowerFacts

  • Compact ZTR 35 35 in works out to 0.57 ha/hour; EDGE 34 BRIGGS works out to 0.67 ha/hour, a 0.10 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Weight: not published for Compact ZTR 35 35 in.
  • Warranty: not published for Compact ZTR 35 35 in.
  • Blades: not published for Compact ZTR 35 35 in.
  • Engine Make: not published for Compact ZTR 35 35 in.
  • Drive System: not published for Compact ZTR 35 35 in.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every zero-turn mower sold in Australia · more Cox · more Ariens
Side-by-side specifications: Cox Compact ZTR 35 35 in vs Ariens EDGE 34 BRIGGS
Spec Compact ZTR 35 35 in
Cox · Zero-Turn
EDGE 34 BRIGGS
Ariens · Zero-Turn
RRP (AUD) A$7,999A$7,499
Engine
Power Source gas gas
Displacement 41.4 ci (679 cc) 40 ci (656 cc)
Engine Power 24 hp 20 hp
Engine Make — Briggs & Stratton® EXi2000
Deck
Cutting Width 35 in (889 mm) 34 in (864 mm)
Blades — 2
Min Cut Height 0.8 in (20 mm) 1.5 in (38 mm)
Max Cut Height 3.9 in (100 mm) 4.5 in (114 mm)
Spindle Type Electromagnetic Clutch —
Blade Tip Speed — 18179 ft/min (5541 m/min)
Cut Positions — 7
Drive
Transmission Hydro-Gear ZT-2200 Hydrostatic
Ground Speed 5 mph 6 mph
Drive Tire Size Front 11 X 400 X 5, Rear 18 X 6.50-8 —
Reverse Speed — 3 mph
Drive System — Hydro-Gear® EZT® Transaxles
Dimensions
Weight — 445 lbs (201.8 kg)
Fuel Capacity 4.8 gal (18 L) 2 gal (7.6 L)
Length 74.8 in (1900 mm) 68 in (1727 mm)
Width 37 in (940 mm) —
Commercial / Pro
Frame Construction Fabricated Steel: Chassis 4 mm / Deck 3 mm —
Seat Type Premium Highback Seat —
General
Warranty — 2 yr

EDGE 34 BRIGGS: Specs verified against the retailer listing on Jun 6, 2026 — allmachines.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction