Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Cox Drive 19 19 in — residential: typical home lawns; 19-inch deck; gas powered
- Masport 625 ST 3'n1 — residential: typical home lawns; 19-inch deck; gas powered
What’s different? The 2 differences that matter most, from the published figures.
- Drive 19 19 in has a Steel deck; 625 ST 3'n1 has a Heavy Duty Steel deck.
- Drive 19 19 in lists at A$849; 625 ST 3'n1 lists at A$779, a A$70 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
what isn’t comparable
Not comparable
- Displacement: not published for Drive 19 19 in.
- Bagger Capacity: not published for Drive 19 19 in.
- Blades: not published for Drive 19 19 in.
- Drive System: not published for Drive 19 19 in.
- Discharge: not published for Drive 19 19 in.
- Cut height range: not published for Drive 19 19 in.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Drive 19 19 in Cox · Push / Walk-Behind |
625 ST 3'n1 Masport · Push / Walk-Behind |
|---|---|---|
| RRP (AUD) | A$849 | A$779 |
| Engine | ||
| Power Source | gas | gas |
| Displacement | — | 10.6 ci (173 cc) |
| Engine Make | Kohler | Kohler |
| Engine Model | Kohler XTX775 | XT775 IC |
| Deck | ||
| Cutting Width | 19 in (483 mm) | 19.1 in (485 mm) |
| Min Cut Height | — | 0.6 in (14 mm) |
| Max Cut Height | — | 2.8 in (72 mm) |
| Deck Material | Steel | Heavy Duty Steel |
| Blades | — | 4 |
| Discharge | — | Catch, Mulch, Rear Discharge |
| Cut Positions | — | 10 |
| Drive | ||
| Drive System | — | Push |
| Dimensions | ||
| Weight | 77 lbs (35 kg) | 76 lbs (34.6 kg) |
| General | ||
| Bagger Capacity | — | 1.4 bu (50 L) |
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.