Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Gravely Z-STANCE 32 KAWASAKI — commercial: daily paid use and high acreage; 32-inch deck; gas powered
- Bad Boy Mowers Revolt SD — commercial: daily paid use and high acreage; 34-inch deck; gas powered
What’s different? The 4 differences that matter most, from the published figures.
- Z-STANCE 32 KAWASAKI holds 17 L (4.5 gal) of fuel; Revolt SD holds 29.6 L (7.8 gal) of fuel, a 12.5 L difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- Z-STANCE 32 KAWASAKI has a Fabricated X-Factor ® 2 deck; Revolt SD has a 7 Gauge / 4.8mm deck.
- Z-STANCE 32 KAWASAKI has a 813 mm (32 in) deck; Revolt SD has a 864 mm (34 in) deck, a 51 mm difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
- Z-STANCE 32 KAWASAKI weighs 303.4 kg (669 lbs); Revolt SD weighs 327 kg (721 lbs), a 23.6 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Z-STANCE 32 KAWASAKI's weight means for a trailer ›
calculated figures and what isn’t comparable
Calculated by MowerFacts
- Z-STANCE 32 KAWASAKI works out to 0.73 ha/hour; Revolt SD works out to 0.78 ha/hour, a 0.05 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Engine Make: not published for Revolt SD.
- Transmission: not published for Z-STANCE 32 KAWASAKI.
- Fuel Type: not published for Revolt SD.
- Deck Material: not published for Revolt SD.
- Drive System: not published for Revolt SD.
- Discharge: not published for Revolt SD.
- Cut height range: not published for Z-STANCE 32 KAWASAKI.
- Price: Revolt SD is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Z-STANCE 32 KAWASAKI Gravely · Commercial |
Revolt SD Bad Boy Mowers · Commercial |
|---|---|---|
| RRP (AUD) | A$13,999 | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Kawasaki® | — |
| Displacement | 36.8 ci (603 cc) | 36.8 ci (603 cc) |
| Engine Power | 18.5 hp | 18.5 hp |
| Engine Model | FS600V | — |
| Fuel Type | Gas | — |
| Deck | ||
| Cutting Width | 32 in (813 mm) | 34 in (864 mm) |
| Deck Material | 7 ga | — |
| Deck Construction | Fabricated X-Factor ® 2 | 7 Gauge / 4.8mm |
| Deck Gauge | 7 | — |
| Min Cut Height | — | 2 in (50 mm) |
| Discharge | Side | — |
| Max Cut Height | — | 5 in (127 mm) |
| Drive | ||
| Transmission | — | Dual Hydro Gear 2800 |
| Ground Speed | 7 mph | 7 mph |
| Drive Tire Size | — | 21x7-10 Reaper |
| Reverse Speed | 3 mph | — |
| Drive System | Hydro-Gear® ZT-3100® Transaxles | — |
| Dimensions | ||
| Weight | 669 lbs (303.4 kg) | 721 lbs (327 kg) |
| Fuel Capacity | 4.5 gal (17 L) | 7.8 gal (29.6 L) |
| Length | — | 63.7 in (1619 mm) |
| Height | — | 47 in (1194 mm) |
Where these models differ, explained
Z-STANCE 32 KAWASAKI: Specs verified against the retailer listing on Jun 7, 2026 — saffordequipment.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.