MowerFacts
Home › Australia › Compare

Compare Mowers

Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Honda HRU19 — residential: typical home lawns; 19-inch deck; gas powered
  • Masport 300 ST 3'n1 — residential: typical home lawns; 18-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. HRU19 lists at A$1,049; 300 ST 3'n1 lists at A$599, a A$450 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
  2. HRU19 has a Cast Aluminium deck; 300 ST 3'n1 has a Heavy Duty Steel deck.
  3. HRU19 has Recoil start; 300 ST 3'n1 has Auto Choke start.
  4. HRU19 weighs 33 kg (73 lbs); 300 ST 3'n1 weighs 30.7 kg (68 lbs), a 2.3 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What HRU19's weight means for a trailer ›
  5. HRU19 has a 54 L (1.5 bu) bagger; 300 ST 3'n1 has a 50 L (1.4 bu) bagger, a 4 L difference.
3 more differences, what isn’t comparable

Other verified differences

  • HRU19 has a 166 cc (10.1 ci) engine; 300 ST 3'n1 has a 159 cc (9.7 ci) engine, a 7 cc difference.
  • HRU19 cuts from 16 mm (0.6 in) to 80 mm (3.1 in); 300 ST 3'n1 cuts from 10 mm (0.4 in) to 70 mm (2.8 in).
  • HRU19 has a 470 mm (18.5 in) deck; 300 ST 3'n1 has a 460 mm (18.1 in) deck, a 10 mm difference.

Not comparable

  • Fuel Capacity: not published for 300 ST 3'n1.
  • Warranty: not published for 300 ST 3'n1.
  • Engine Make: not published for HRU19.
  • Fuel Type: not published for 300 ST 3'n1.
  • Discharge: not published for HRU19.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every push / walk-behind mower sold in Australia · more Honda · more Masport
Side-by-side specifications: Honda HRU19 vs Masport 300 ST 3'n1
Spec HRU19
Honda · Push / Walk-Behind
300 ST 3'n1
Masport · Push / Walk-Behind
RRP (AUD) A$1,049A$599
Engine
Power Source gas gas
Displacement 10.1 ci (166 cc) 9.7 ci (159 cc)
Start Type Recoil Auto Choke
Engine Model GCV170 Series SEVEN IC
Fuel Type Unleaded 91 —
Engine Make — Masport
Deck
Cutting Width 18.5 in (470 mm) 18.1 in (460 mm)
Min Cut Height 0.6 in (16 mm) 0.4 in (10 mm)
Max Cut Height 3.1 in (80 mm) 2.8 in (70 mm)
Deck Material Cast Aluminium Heavy Duty Steel
Blades 4 4
Discharge — Catch, Mulch, Rear Discharge
Cut Positions — 10
Drive
Drive System Push Push
Dimensions
Weight 73 lbs (33 kg) 68 lbs (30.7 kg)
Fuel Capacity 0.2 gal (0.9 L) —
Commercial / Pro
Commercial Warranty 5 years (motor) & 2 years (frame)* —
General
Warranty 5 yr —
Bagger Capacity 1.5 bu (54 L) 1.4 bu (50 L)

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction