Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Husqvarna MZ48 — prosumer: larger home properties and light acreage; 48-inch deck; gas powered
- Ariens Apex 48 in Zero-Turn Mower — prosumer: larger home properties and light acreage; 48-inch deck; gas powered
What’s different? The 2 differences that matter most, from the published figures.
- MZ48 uses a Kawasaki engine; Apex 48 in Zero-Turn Mower uses a Kohler KT730 V-Twin engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- MZ48 lists at A$14,499; Apex 48 in Zero-Turn Mower lists at A$14,199, a A$300 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
what isn’t comparable
Not comparable
- Engine Power: not published for MZ48.
- Ground Speed: not published for Apex 48 in Zero-Turn Mower.
- Warranty: not published for MZ48.
- Blades: not published for MZ48.
- Fuel Type: not published for MZ48.
- Drive System: not published for MZ48.
- Cut height range: not published for MZ48.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | MZ48 Husqvarna · Zero-Turn |
Apex 48 in Zero-Turn Mower Ariens · Zero-Turn |
|---|---|---|
| RRP (AUD) | A$14,499 | A$14,199 |
| Engine | ||
| Power Source | gas | gas |
| Displacement | 44.3 ci (726 cc) | 44.2 ci (725 cc) |
| Engine Power | — | 23 hp |
| Engine Make | Kawasaki | Kohler KT730 V-Twin |
| Engine Model | FR Series | — |
| Fuel Type | — | Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications) |
| Deck | ||
| Cutting Width | 48 in (1220 mm) | 48 in (1219 mm) |
| Blades | — | 3 |
| Min Cut Height | — | 1.5 in (38 mm) |
| Max Cut Height | — | 5 in (127 mm) |
| Deck Construction | Fabricated | Fabricated 10 Gauge |
| Spindle Type | — | Forged aluminium housing, forged steel shaft with sealed ball bearings |
| Blade Tip Speed | — | 17999 ft/min (5486 m/min) |
| Drive | ||
| Ground Speed | 8.5 mph | — |
| Drive Tire Size | — | 22 x 10 x 12 Turf tread |
| Drive System | — | Hydro Gear ZT-3100 Transaxles |
| Dimensions | ||
| Weight | 794 lbs (360.1 kg) | 802 lbs (363.7 kg) |
| Fuel Capacity | 5 gal (18.9 L) | 5 gal (18.8 L) |
| Length | — | 79 in (2006 mm) |
| Width | — | 50.8 in (1290 mm) |
| Height | — | 47 in (1193 mm) |
| Commercial / Pro | ||
| Frame Construction | — | Frame 1" x 3" steel tubular frame welded |
| Seat Type | Premium High back 21" with armrest | 20” High Back w/ lever adjust and padded armrests. |
| Commercial Warranty | — | 4 Years or 500 Hours Commercial Warranty |
| General | ||
| Warranty | — | 4 yr |
Where these models differ, explained
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.