MowerFacts
Home › Australia › Compare

Compare Mowers

Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Husqvarna Z254F — prosumer: larger home properties and light acreage; 54-inch deck; gas powered
  • Ariens IKON 52 KAWASAKI — prosumer: larger home properties and light acreage; 52-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. Z254F weighs 267.6 kg (590 lbs); IKON 52 KAWASAKI weighs 309.4 kg (682 lbs), a 41.7 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Z254F's weight means for a trailer ›
  2. Z254F lists at A$11,499; IKON 52 KAWASAKI lists at A$10,399, a A$1,100 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
  3. Z254F cuts from 38 mm (1.5 in) to 102 mm (4 in); IKON 52 KAWASAKI cuts from 38 mm (1.5 in) to 114 mm (4.5 in). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
  4. Z254F has a published top speed of 6.5 mph; IKON 52 KAWASAKI has a published top speed of 7 mph, a 0.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  5. Z254F has a 1,372 mm (54 in) deck; IKON 52 KAWASAKI has a 1,321 mm (52 in) deck, a 51 mm difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
1 more difference, what isn’t comparable

Other verified differences

  • Z254F has a 24 hp engine; IKON 52 KAWASAKI has a 23 hp engine, a 1 hp difference.

Not comparable

  • Warranty: not published for Z254F.
  • Deck Material: not published for IKON 52 KAWASAKI.
  • Drive System: not published for Z254F.
  • Discharge: not published for IKON 52 KAWASAKI.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every zero-turn mower sold in Australia · more Husqvarna · more Ariens
Side-by-side specifications: Husqvarna Z254F vs Ariens IKON 52 KAWASAKI
Spec Z254F
Husqvarna · Zero-Turn
IKON 52 KAWASAKI
Ariens · Zero-Turn
RRP (AUD) A$11,499A$10,399
Engine
Power Source gas gas
Displacement 44.3 ci (725.9 cc) 44.3 ci (726 cc)
Engine Power 24 hp 23 hp
Engine Make Kawasaki Kawasaki® FR691V
Engine Model FR Series —
Cylinders 2 —
Deck
Cutting Width 54 in (1372 mm) 52 in (1321 mm)
Blades 3 3
Min Cut Height 1.5 in (38 mm) 1.5 in (38 mm)
Max Cut Height 4 in (102 mm) 4.5 in (114 mm)
Deck Material Steel —
Anti-Scalp Rollers Yes —
Blade Tip Speed — 18356 ft/min (5595 m/min)
Discharge Collect/Mulch/Side discharge —
Cut Positions 6 13
Drive
Transmission Hydrostatic Hydrostatic
Ground Speed 6.5 mph 7 mph
Reverse Speed — 3 mph
Drive System — Hydro-Gear® EZT® Transaxles
Dimensions
Weight 590 lbs (267.6 kg) 682 lbs (309.4 kg)
Fuel Capacity 3.5 gal (13.2 L) 3.5 gal (13.2 L)
Length 75 in (1905 mm) 74.5 in (1892 mm)
Height 40 in (1016 mm) —
Commercial / Pro
Seat Type 15" high back —
General
Warranty — 3 yr

Z254F: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — husqvarna.com.

IKON 52 KAWASAKI: Specs verified against the retailer listing on Jun 6, 2026 — mower-depot.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction