Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Husqvarna Z460 — commercial: daily paid use and high acreage; 60-inch deck; gas powered
- Spartan Spartan SRTXD 61 in Zero Turn Mower — commercial: daily paid use and high acreage; 61-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Z460 lists at A$17,999; Spartan SRTXD 61 in Zero Turn Mower lists at A$26,999, a A$9,000 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
- Z460 has a 23 hp engine; Spartan SRTXD 61 in Zero Turn Mower has a 35 hp engine, a 12 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
- Z460 has a Hydrostatic transmission; Spartan SRTXD 61 in Zero Turn Mower has a Parker HTG 16cc wheel motors transmission. The transmission grade tracks duty rating and speed. Grade names are each maker's own and are not comparable across brands.
- Z460 weighs 373.3 kg (823 lbs); Spartan SRTXD 61 in Zero Turn Mower weighs 551 kg (1,215 lbs), a 177.7 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Z460's weight means for a trailer ›
- Z460 holds 22.7 L (6 gal) of fuel; Spartan SRTXD 61 in Zero Turn Mower holds 36 L (9.5 gal) of fuel, a 13.2 L difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
3 more differences, calculated figures and what isn’t comparable
Other verified differences
- Z460 has a published top speed of 10 mph; Spartan SRTXD 61 in Zero Turn Mower has a published top speed of 13 mph, a 3 mph difference.
- Z460 has Collect/Mulch/Side discharge discharge; Spartan SRTXD 61 in Zero Turn Mower has High density, rubberised discharge.
- Z460 cuts from 38 mm (1.5 in) to 114 mm (4.5 in); Spartan SRTXD 61 in Zero Turn Mower cuts from 38 mm (1.5 in) to 140 mm (5.5 in).
Calculated by MowerFacts
- Z460 works out to 1.96 ha/hour; Spartan SRTXD 61 in Zero Turn Mower works out to 2.59 ha/hour, a 0.63 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Displacement: not published for Spartan SRTXD 61 in Zero Turn Mower.
- Warranty: not published for Z460.
- Fuel Type: not published for Z460.
- Deck Material: not published for Spartan SRTXD 61 in Zero Turn Mower.
- Deck Construction: not published for Z460.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Z460 Husqvarna · Commercial |
Spartan SRTXD 61 in Zero Turn Mower Spartan · Commercial |
|---|---|---|
| RRP (AUD) | A$17,999 | A$26,999 |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Kawasaki | Air cooled, 90-degree V-Twin, normally aspirated petrol engine |
| Displacement | 44.3 ci (725.9 cc) | — |
| Engine Power | 23 hp | 35 hp |
| Cylinders | 2 | — |
| Engine Model | FS Series V-Twin | — |
| Fuel Type | — | Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications) |
| Deck | ||
| Cutting Width | 60 in (1524 mm) | 61 in (1549 mm) |
| Blades | 3 | 3 |
| Deck Material | Steel | — |
| Deck Construction | — | Fabricated 7 Gauge with 7 gauge spindle mounts and 9/16 impact bar |
| Spindle Type | — | 7 Gauge |
| Anti-Scalp Rollers | Yes | — |
| Min Cut Height | 1.5 in (38 mm) | 1.5 in (38 mm) |
| Blade Tip Speed | — | 18750 ft/min (5715 m/min) |
| Discharge | Collect/Mulch/Side discharge | High density, rubberised |
| Cut Positions | 13 | — |
| Max Cut Height | 4.5 in (114 mm) | 5.5 in (140 mm) |
| Drive | ||
| Transmission | Hydrostatic | Parker HTG 16cc wheel motors |
| Ground Speed | 10 mph | 13 mph |
| Drive Tire Size | — | 24” Turf radials. |
| Dimensions | ||
| Weight | 823 lbs (373.3 kg) | 1215 lbs (551 kg) |
| Fuel Capacity | 6 gal (22.7 L) | 9.5 gal (36 L) |
| Length | 76.5 in (1943 mm) | 84 in (2134 mm) |
| Width | — | 62.5 in (1588 mm) |
| Height | 49 in (1245 mm) | 75 in (1905 mm) |
| Commercial / Pro | ||
| Frame Construction | — | Fabricated 7 Gauge with 7 gauge spindle mounts and 9/16 impact bar |
| Seat Type | Professional | TCB-3 TecsPak Elastomer Dampeners with 360 Floating System |
| Commercial Warranty | — | 2 Years / Unlimited Hours Domestic Warranty / |
| General | ||
| Warranty | — | 3 yr |
Where these models differ, explained
Z460: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — husqvarna.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.