Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Kubota FC3-221E — commercial: daily paid use and high acreage
- Kubota ZD1011-54 — commercial: daily paid use and high acreage; 54-inch deck
What’s different? The 5 differences that matter most, from the published figures.
- FC3-221E uses a Kubota D902 engine; ZD1011-54 uses a Kubota D782-E4-ZD-3 engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- FC3-221E has a HST transmission; ZD1011-54 has a Kubota HST transmission. The transmission grade tracks duty rating and speed. Grade names are each maker's own and are not comparable across brands.
- FC3-221E weighs 823 kg (1,814 lbs); ZD1011-54 weighs 600.1 kg (1,323 lbs), a 222.9 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What FC3-221E's weight means for a trailer ›
- FC3-221E has 2WD drive; ZD1011-54 has Shaft drive.
- FC3-221E has a published top speed of 6.8 mph; ZD1011-54 has a published top speed of 9 mph, a 2.2 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
3 more differences, what isn’t comparable
Other verified differences
- FC3-221E holds 30 L (7.9 gal) of fuel; ZD1011-54 holds 22.7 L (6 gal) of fuel, a 7.3 L difference.
- FC3-221E has a 22 hp engine; ZD1011-54 has a 19.3 hp engine, a 2.7 hp difference.
- FC3-221E has a 898 cc (54.8 ci) engine; ZD1011-54 has a 778 cc (47.5 ci) engine, a 120 cc difference.
Not comparable
- Cutting Width: not published for FC3-221E.
- Bagger Capacity: not published for ZD1011-54.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | FC3-221E Kubota · Commercial |
ZD1011-54 Kubota · Commercial |
|---|---|---|
| RRP (AUD) | dealer quote | dealer quote |
| Engine | ||
| Power Source | diesel | diesel |
| Engine Make | Kubota D902 | Kubota D782-E4-ZD-3 |
| Displacement | 54.8 ci (898 cc) | 47.5 ci (778 cc) |
| Engine Power | 22 hp | 19.3 hp |
| Cylinders | 3 | — |
| Fuel Type | Diesel | Diesel |
| Deck | ||
| Cutting Width | — | 54 in (1372 mm) |
| Drive | ||
| Transmission | HST | Kubota HST |
| Ground Speed | 6.8 mph | 9 mph |
| Drive Tire Size | 15x6-6 | — |
| Reverse Speed | 3.7 mph | — |
| Drive System | 2WD | Shaft |
| Dimensions | ||
| Weight | 1814 lbs (823 kg) | 1323 lbs (600.1 kg) |
| Fuel Capacity | 7.9 gal (30 L) | 6 gal (22.7 L) |
| Length | 90.4 in (2295 mm) | — |
| Width | 43.5 in (1105 mm) | — |
| Height | 79.1 in (2010 mm) | — |
| General | ||
| Bagger Capacity | 17 bu (600 L) | — |
ZD1011-54: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — kubotausa.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.