Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Kubota FC3-221E — commercial: daily paid use and high acreage
- Toro ProLine H600 Direct Collect — commercial: daily paid use and high acreage
What’s different? The 3 differences that matter most, from the published figures.
- FC3-221E weighs 823 kg (1,814 lbs); ProLine H600 Direct Collect weighs 635 kg (1,400 lbs), a 188 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What FC3-221E's weight means for a trailer ›
- FC3-221E has a 22 hp engine; ProLine H600 Direct Collect has a 18 hp engine, a 4 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
- FC3-221E holds 30 L (7.9 gal) of fuel; ProLine H600 Direct Collect holds 22 L (5.8 gal) of fuel, a 8 L difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
what isn’t comparable
Not comparable
- Displacement: not published for ProLine H600 Direct Collect.
- Ground Speed: not published for ProLine H600 Direct Collect.
- Warranty: not published for FC3-221E.
- Bagger Capacity: not published for ProLine H600 Direct Collect.
- Engine Make: not published for ProLine H600 Direct Collect.
- Transmission: not published for ProLine H600 Direct Collect.
- Fuel Type: not published for ProLine H600 Direct Collect.
- Deck Construction: not published for FC3-221E.
- Drive System: not published for ProLine H600 Direct Collect.
- Cut height range: not published for FC3-221E.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | FC3-221E Kubota · Commercial |
ProLine H600 Direct Collect Toro · Commercial |
|---|---|---|
| RRP (AUD) | dealer quote | dealer quote |
| Engine | ||
| Power Source | diesel | diesel |
| Engine Make | Kubota D902 | — |
| Displacement | 54.8 ci (898 cc) | — |
| Engine Power | 22 hp | 18 hp |
| Cylinders | 3 | — |
| Fuel Type | Diesel | — |
| Deck | ||
| Deck Construction | — | Formed and welded deck with front bull-nose bumper. Tilting deck for easy service access, tilts to 40° |
| Min Cut Height | — | 1 in (25 mm) |
| Max Cut Height | — | 3.5 in (90 mm) |
| Drive | ||
| Transmission | HST | — |
| Ground Speed | 6.8 mph | — |
| Drive Tire Size | 15x6-6 | — |
| Reverse Speed | 3.7 mph | — |
| Drive System | 2WD | — |
| Dimensions | ||
| Weight | 1814 lbs (823 kg) | 1400 lbs (635 kg) |
| Fuel Capacity | 7.9 gal (30 L) | 5.8 gal (22 L) |
| Length | 90.4 in (2295 mm) | — |
| Width | 43.5 in (1105 mm) | — |
| Height | 79.1 in (2010 mm) | — |
| General | ||
| Warranty | — | 2 yr |
| Bagger Capacity | 17 bu (600 L) | — |
Where these models differ, explained
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.