MowerFacts
Home › Australia › Compare

Compare Mowers

Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Masport 585 3'n1 — residential: typical home lawns; 19-inch deck; gas powered
  • Honda HRU19 — residential: typical home lawns; 19-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. 585 3'n1 has a Heavy Duty Steel deck; HRU19 has a Cast Aluminium deck.
  2. 585 3'n1 has Auto Choke start; HRU19 has Recoil start.
  3. 585 3'n1 weighs 30.3 kg (67 lbs); HRU19 weighs 33 kg (73 lbs), a 2.7 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What 585 3'n1's weight means for a trailer ›
  4. 585 3'n1 has a 485 mm (19.1 in) deck; HRU19 has a 470 mm (18.5 in) deck, a 15 mm difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
  5. 585 3'n1 has a 50 L (1.4 bu) bagger; HRU19 has a 54 L (1.5 bu) bagger, a 4 L difference.
1 more difference, what isn’t comparable

Other verified differences

  • 585 3'n1 cuts from 10 mm (0.4 in) to 70 mm (2.8 in); HRU19 cuts from 16 mm (0.6 in) to 80 mm (3.1 in).

Not comparable

  • Fuel Capacity: not published for 585 3'n1.
  • Warranty: not published for 585 3'n1.
  • Engine Make: not published for HRU19.
  • Fuel Type: not published for 585 3'n1.
  • Discharge: not published for HRU19.
  • Price: 585 3'n1 is dealer quote only.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every push / walk-behind mower sold in Australia · more Masport · more Honda
Side-by-side specifications: Masport 585 3'n1 vs Honda HRU19
Spec 585 3'n1
Masport · Push / Walk-Behind
HRU19
Honda · Push / Walk-Behind
RRP (AUD) dealer quoteA$1,049
Engine
Power Source gas gas
Displacement 10.1 ci (166 cc) 10.1 ci (166 cc)
Start Type Auto Choke Recoil
Engine Model GCV170 GCV170
Fuel Type — Unleaded 91
Engine Torque 8.2 ft-lb —
Engine Make Honda —
Deck
Cutting Width 19.1 in (485 mm) 18.5 in (470 mm)
Min Cut Height 0.4 in (10 mm) 0.6 in (16 mm)
Max Cut Height 2.8 in (70 mm) 3.1 in (80 mm)
Deck Material Heavy Duty Steel Cast Aluminium
Blades 4 4
Discharge Catch, Mulch, Rear Discharge —
Cut Positions 10 —
Drive
Drive System Push Push
Dimensions
Weight 67 lbs (30.3 kg) 73 lbs (33 kg)
Fuel Capacity — 0.2 gal (0.9 L)
Commercial / Pro
Commercial Warranty — 5 years (motor) & 2 years (frame)*
General
Warranty — 5 yr
Bagger Capacity 1.4 bu (50 L) 1.5 bu (54 L)

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction