Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Masport Commander DC510 — residential: typical home lawns; 20-inch deck; gas powered
- Masport 200 ST 3'n1 — residential: typical home lawns; 18-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Commander DC510 lists at A$2,699; 200 ST 3'n1 lists at A$499, a A$2,200 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
- Commander DC510 weighs 65 kg (143 lbs); 200 ST 3'n1 weighs 29.1 kg (64 lbs), a 35.9 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Commander DC510's weight means for a trailer ›
- Commander DC510 uses a Briggs & Stratton engine; 200 ST 3'n1 uses a Masport engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- Commander DC510 cuts from 7 mm (0.3 in) to 30 mm (1.2 in); 200 ST 3'n1 cuts from 10 mm (0.4 in) to 70 mm (2.8 in). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
- Commander DC510 has Chain Drive drive; 200 ST 3'n1 has Push drive.
4 more differences, what isn’t comparable
Other verified differences
- Commander DC510 has Cut and Catch discharge; 200 ST 3'n1 has Catch, Mulch, Rear Discharge discharge.
- Commander DC510 has a 70 L (2 bu) bagger; 200 ST 3'n1 has a 50 L (1.4 bu) bagger, a 20 L difference.
- Commander DC510 has a 510 mm (20.1 in) deck; 200 ST 3'n1 has a 460 mm (18.1 in) deck, a 50 mm difference.
- Commander DC510 has a 163 cc (9.9 ci) engine; 200 ST 3'n1 has a 139 cc (8.5 ci) engine, a 24 cc difference.
Not comparable
- Blades: not published for Commander DC510.
- Deck Material: not published for Commander DC510.
- Start Type: not published for Commander DC510.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Commander DC510 Masport · Push / Walk-Behind |
200 ST 3'n1 Masport · Push / Walk-Behind |
|---|---|---|
| RRP (AUD) | A$2,699 | A$499 |
| Engine | ||
| Power Source | gas | gas |
| Displacement | 9.9 ci (163 cc) | 8.5 ci (139 cc) |
| Start Type | — | Auto Choke |
| Engine Make | Briggs & Stratton | Masport |
| Engine Model | OHV 5.0HP | Series SIX |
| Deck | ||
| Cutting Width | 20.1 in (510 mm) | 18.1 in (460 mm) |
| Min Cut Height | 0.3 in (7 mm) | 0.4 in (10 mm) |
| Max Cut Height | 1.2 in (30 mm) | 2.8 in (70 mm) |
| Deck Material | — | Heavy Duty Steel |
| Blades | — | 4 |
| Discharge | Cut and Catch | Catch, Mulch, Rear Discharge |
| Cut Positions | — | 10 |
| Drive | ||
| Drive System | Chain Drive | Push |
| Dimensions | ||
| Weight | 143 lbs (65 kg) | 64 lbs (29.1 kg) |
| General | ||
| Bagger Capacity | 2 bu (70 L) | 1.4 bu (50 L) |
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.