MowerFacts
Home › Australia › Compare

Compare Mowers

Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Masport Lawn Marshal — residential: typical home lawns; 17-inch deck; gas powered
  • Masport 200 ST 3'n1 — residential: typical home lawns; 18-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. Lawn Marshal uses a AL-KO engine; 200 ST 3'n1 uses a Masport engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
  2. Lawn Marshal has a Steel deck; 200 ST 3'n1 has a Heavy Duty Steel deck.
  3. Lawn Marshal lists at A$399; 200 ST 3'n1 lists at A$499, a A$100 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
  4. Lawn Marshal has 2 blades; 200 ST 3'n1 has 4 blades.
  5. Lawn Marshal has Cut, Catch discharge; 200 ST 3'n1 has Catch, Mulch, Rear Discharge discharge.
5 more differences

Other verified differences

  • Lawn Marshal weighs 23.8 kg (52 lbs); 200 ST 3'n1 weighs 29.1 kg (64 lbs), a 5.3 kg difference.
  • Lawn Marshal has a 420 mm (16.5 in) deck; 200 ST 3'n1 has a 460 mm (18.1 in) deck, a 40 mm difference.
  • Lawn Marshal has a 123 cc (7.5 ci) engine; 200 ST 3'n1 has a 139 cc (8.5 ci) engine, a 16 cc difference.
  • Lawn Marshal has a 42 L (1.2 bu) bagger; 200 ST 3'n1 has a 50 L (1.4 bu) bagger, a 8 L difference.
  • Lawn Marshal cuts from 13 mm (0.5 in) to 68 mm (2.7 in); 200 ST 3'n1 cuts from 10 mm (0.4 in) to 70 mm (2.8 in).

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every push / walk-behind mower sold in Australia · more Masport
Side-by-side specifications: Masport Lawn Marshal vs Masport 200 ST 3'n1
Spec Lawn Marshal
Masport · Push / Walk-Behind
200 ST 3'n1
Masport · Push / Walk-Behind
RRP (AUD) A$399A$499
Engine
Power Source gas gas
Displacement 7.5 ci (123 cc) 8.5 ci (139 cc)
Start Type Auto Choke Auto Choke
Engine Make AL-KO Masport
Engine Model OHV Series FIVE Series SIX
Deck
Cutting Width 16.5 in (420 mm) 18.1 in (460 mm)
Min Cut Height 0.5 in (13 mm) 0.4 in (10 mm)
Max Cut Height 2.7 in (68 mm) 2.8 in (70 mm)
Deck Material Steel Heavy Duty Steel
Blades 2 4
Discharge Cut, Catch Catch, Mulch, Rear Discharge
Cut Positions 6 10
Drive
Drive System Push Push
Dimensions
Weight 52 lbs (23.8 kg) 64 lbs (29.1 kg)
General
Bagger Capacity 1.2 bu (42 L) 1.4 bu (50 L)

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction