Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Masport TTM98SH — residential: typical home lawns; 39-inch deck; gas powered
- Masport TTM108SH — residential: typical home lawns; 43-inch deck; gas powered
What’s different? The 2 differences that matter most, from the published figures.
- TTM98SH has a 980 mm (38.6 in) deck; TTM108SH has a 1,080 mm (42.5 in) deck, a 100 mm difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
- TTM98SH lists at A$4,199; TTM108SH lists at A$4,499, a A$300 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
calculated figures
Calculated by MowerFacts
- TTM98SH works out to 0.69 ha/hour; TTM108SH works out to 0.76 ha/hour, a 0.07 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | TTM98SH Masport · Riding (Lawn Tractor) |
TTM108SH Masport · Riding (Lawn Tractor) |
|---|---|---|
| RRP (AUD) | A$4,199 | A$4,499 |
| Engine | ||
| Power Source | gas | gas |
| Engine Power | 15 hp | 15 hp |
| Engine Make | Masport | Masport |
| Cylinders | 1 | 1 |
| Engine Model | M400 Single Cylinder | M400 Single Cylinder |
| Deck | ||
| Cutting Width | 38.6 in (980 mm) | 42.5 in (1080 mm) |
| Blades | 2 | 2 |
| Min Cut Height | 1.2 in (30 mm) | 1.2 in (30 mm) |
| Max Cut Height | 3.5 in (90 mm) | 3.5 in (90 mm) |
| Deck Construction | Steel | Steel |
| Discharge | Side Discharge | Side Discharge |
| Cut Positions | 7 | 7 |
| Drive | ||
| Transmission | Rear - Hydrostatic Tuff Torq K46DR | Rear - Hydrostatic Tuff Torq K46DR |
| Ground Speed | 5.5 mph | 5.5 mph |
| Drive Tire Size | 18" x 8.5 - 8 | 18" x 8.5 - 8 |
| Reverse Speed | 2.8 mph | 2.8 mph |
| Drive System | V-Belt | V-Belt |
| Dimensions | ||
| Weight | 371 lbs (168.5 kg) | 375 lbs (170 kg) |
| Fuel Capacity | 2 gal (7.5 L) | 2 gal (7.5 L) |
| Commercial / Pro | ||
| Frame Construction | Steel | Steel |
| Seat Type | Adjustable with high back | Adjustable with high back |
Where these models differ, explained
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.