Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Spartan Spartan KG-XD 54 in Stand-On Mower — commercial: daily paid use and high acreage; 54-inch deck; gas powered
- Husqvarna Z554L — commercial: daily paid use and high acreage; 54-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Spartan KG-XD 54 in Stand-On Mower has a Parker HTJ 12cc wheel motors transmission; Z554L has a Hydrostatic transmission. The transmission grade tracks duty rating and speed. Grade names are each maker's own and are not comparable across brands.
- Spartan KG-XD 54 in Stand-On Mower has High density, rubberised discharge; Z554L has Collect/Mulch/Side discharge discharge.
- Spartan KG-XD 54 in Stand-On Mower weighs 488 kg (1,076 lbs); Z554L weighs 551.1 kg (1,215 lbs), a 63.1 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Spartan KG-XD 54 in Stand-On Mower's weight means for a trailer ›
- Spartan KG-XD 54 in Stand-On Mower has a published top speed of 11 mph; Z554L has a published top speed of 12 mph, a 1 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- Spartan KG-XD 54 in Stand-On Mower has a 25.5 hp engine; Z554L has a 27 hp engine, a 1.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
calculated figures and what isn’t comparable
Calculated by MowerFacts
- Spartan KG-XD 54 in Stand-On Mower works out to 1.94 ha/hour; Z554L works out to 2.12 ha/hour, a 0.18 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Displacement: not published for Spartan KG-XD 54 in Stand-On Mower.
- Warranty: not published for Z554L.
- Fuel Type: not published for Z554L.
- Deck Material: not published for Spartan KG-XD 54 in Stand-On Mower.
- Deck Construction: not published for Z554L.
- Drive System: not published for Z554L.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Spartan KG-XD 54 in Stand-On Mower Spartan · Commercial |
Z554L Husqvarna · Commercial |
|---|---|---|
| RRP (AUD) | A$23,499 | A$23,499 |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Air cooled, 90-degree V-Twin, normally aspirated petrol engine | Kawasaki |
| Displacement | — | 52 ci (852.1 cc) |
| Engine Power | 25.5 hp | 27 hp |
| Cylinders | — | 2 |
| Engine Model | — | FX Series V-Twin |
| Fuel Type | Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications) | — |
| Deck | ||
| Cutting Width | 54 in (1372 mm) | 54 in (1372 mm) |
| Blades | 3 | 3 |
| Deck Material | — | Steel |
| Deck Construction | 6” Deep, 7 Gauge with 7 Gauge reinforced spindle areas. Solid 3/8” x 1” reinforced impact areas | — |
| Spindle Type | Cast aluminium. No maintenance / sealed with four bearings per spindle | — |
| Anti-Scalp Rollers | — | Yes |
| Min Cut Height | 1 in (25 mm) | 1 in (25 mm) |
| Blade Tip Speed | 18750 ft/min (5715 m/min) | — |
| Discharge | High density, rubberised | Collect/Mulch/Side discharge |
| Cut Positions | — | 16 |
| Max Cut Height | 5 in (127 mm) | 5 in (127 mm) |
| Drive | ||
| Transmission | Parker HTJ 12cc wheel motors | Hydrostatic |
| Ground Speed | 11 mph | 12 mph |
| Drive Tire Size | 24” Turf radials | — |
| Reverse Speed | 5 mph | — |
| Drive System | V-belt drive from engine crankshaft | — |
| Dimensions | ||
| Weight | 1076 lbs (488 kg) | 1215 lbs (551.1 kg) |
| Fuel Capacity | 12 gal (45.4 L) | 12 gal (45.4 L) |
| Length | 72.5 in (1842 mm) | 81 in (2057 mm) |
| Width | 55.5 in (1410 mm) | — |
| Height | 49 in (1245 mm) | 21 in (533 mm) |
| Commercial / Pro | ||
| Frame Construction | Mainframe 1.5” by 3” (38.1 mm x 76.2 mm) powder coated Fusion-Bonded solid steel bridge frame. Front caster wheels mounted with commercial duty roller bearings on each wheel | — |
| Seat Type | — | Premium, suspension |
| Commercial Warranty | 2 Year / Unlimited Hour Commercial Warranty | — |
| General | ||
| Warranty | 3 yr | — |
Where these models differ, explained
Z554L: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — husqvarna.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.