Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Spartan Spartan RTHD 61 in Zero Turn Mower — commercial: daily paid use and high acreage; 61-inch deck; gas powered
- Husqvarna Z460 — commercial: daily paid use and high acreage; 60-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Spartan RTHD 61 in Zero Turn Mower has a Parker HTJ wheel motors transmission; Z460 has a Hydrostatic transmission. The transmission grade tracks duty rating and speed. Grade names are each maker's own and are not comparable across brands.
- Spartan RTHD 61 in Zero Turn Mower lists at A$23,999; Z460 lists at A$17,999, a A$6,000 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
- Spartan RTHD 61 in Zero Turn Mower weighs 516.1 kg (1,138 lbs); Z460 weighs 373.3 kg (823 lbs), a 142.8 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Spartan RTHD 61 in Zero Turn Mower's weight means for a trailer ›
- Spartan RTHD 61 in Zero Turn Mower holds 35.9 L (9.5 gal) of fuel; Z460 holds 22.7 L (6 gal) of fuel, a 13.2 L difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- Spartan RTHD 61 in Zero Turn Mower has High density, rubberised discharge; Z460 has Collect/Mulch/Side discharge discharge.
3 more differences, calculated figures and what isn’t comparable
Other verified differences
- Spartan RTHD 61 in Zero Turn Mower cuts from 38 mm (1.5 in) to 140 mm (5.5 in); Z460 cuts from 38 mm (1.5 in) to 114 mm (4.5 in).
- Spartan RTHD 61 in Zero Turn Mower has a 27 hp engine; Z460 has a 23 hp engine, a 4 hp difference.
- Spartan RTHD 61 in Zero Turn Mower has a published top speed of 11 mph; Z460 has a published top speed of 10 mph, a 1 mph difference.
Calculated by MowerFacts
- Spartan RTHD 61 in Zero Turn Mower works out to 2.19 ha/hour; Z460 works out to 1.96 ha/hour, a 0.23 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Displacement: not published for Spartan RTHD 61 in Zero Turn Mower.
- Warranty: not published for Z460.
- Fuel Type: not published for Z460.
- Deck Material: not published for Spartan RTHD 61 in Zero Turn Mower.
- Deck Construction: not published for Z460.
- Drive System: not published for Z460.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Spartan RTHD 61 in Zero Turn Mower Spartan · Commercial |
Z460 Husqvarna · Commercial |
|---|---|---|
| RRP (AUD) | A$23,999 | A$17,999 |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Air cooled, 90-degree V-twin, normally aspirated petrol engine | Kawasaki |
| Displacement | — | 44.3 ci (725.9 cc) |
| Engine Power | 27 hp | 23 hp |
| Cylinders | — | 2 |
| Engine Model | — | FS Series V-Twin |
| Fuel Type | Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications) | — |
| Deck | ||
| Cutting Width | 61 in (1549 mm) | 60 in (1524 mm) |
| Blades | 3 | 3 |
| Deck Material | — | Steel |
| Deck Construction | Fabricated 7 Gauge with 7 gauge spindle mounts and 9/16 impact bar | — |
| Spindle Type | 7 Gauge | — |
| Anti-Scalp Rollers | — | Yes |
| Min Cut Height | 1.5 in (38 mm) | 1.5 in (38 mm) |
| Blade Tip Speed | 18750 ft/min (5715 m/min) | — |
| Discharge | High density, rubberised | Collect/Mulch/Side discharge |
| Cut Positions | — | 13 |
| Max Cut Height | 5.5 in (140 mm) | 4.5 in (114 mm) |
| Drive | ||
| Transmission | Parker HTJ wheel motors | Hydrostatic |
| Ground Speed | 11 mph | 10 mph |
| Drive Tire Size | 24” Turf radials. | — |
| Drive System | V-belt drive from engine crankshaft | — |
| Dimensions | ||
| Weight | 1138 lbs (516.1 kg) | 823 lbs (373.3 kg) |
| Fuel Capacity | 9.5 gal (35.9 L) | 6 gal (22.7 L) |
| Length | 84 in (2134 mm) | 76.5 in (1943 mm) |
| Width | 62.5 in (1588 mm) | — |
| Height | 75 in (1905 mm) | 49 in (1245 mm) |
| Commercial / Pro | ||
| Frame Construction | Mainframe 1.5” x 3” (38.1 mm x 76.2 mm) powder coated Fusion-Bonded solid steel bridge frame. Front caster wheels mounted with commercial duty greaseable roller bearings on each wheel | — |
| Seat Type | TCB-3 TecsPak Elastomer Dampeners with 360 Floating System | Professional |
| Commercial Warranty | 2 Years / Unlimited Hours Commercial Warranty | — |
| General | ||
| Warranty | 3 yr | — |
Where these models differ, explained
Z460: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — husqvarna.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.