Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Spartan Spartan Shield HD 54 in Zero Turn Mower — prosumer: larger home properties and light acreage; 56-inch deck; gas powered
- Husqvarna Z254F — prosumer: larger home properties and light acreage; 54-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Spartan Shield HD 54 in Zero Turn Mower has a V-belt drive from engine crankshaft transmission; Z254F has a Hydrostatic transmission. The transmission grade tracks duty rating and speed. Grade names are each maker's own and are not comparable across brands.
- Spartan Shield HD 54 in Zero Turn Mower cuts from 25 mm (1 in) to 127 mm (5 in); Z254F cuts from 38 mm (1.5 in) to 102 mm (4 in). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
- Spartan Shield HD 54 in Zero Turn Mower holds 18.9 L (5 gal) of fuel; Z254F holds 13.2 L (3.5 gal) of fuel, a 5.6 L difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- Spartan Shield HD 54 in Zero Turn Mower has High density, rubberised discharge; Z254F has Collect/Mulch/Side discharge discharge.
- Spartan Shield HD 54 in Zero Turn Mower weighs 326 kg (719 lbs); Z254F weighs 267.6 kg (590 lbs), a 58.4 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Spartan Shield HD 54 in Zero Turn Mower's weight means for a trailer ›
4 more differences, calculated figures and what isn’t comparable
Other verified differences
- Spartan Shield HD 54 in Zero Turn Mower has a published top speed of 8 mph; Z254F has a published top speed of 6.5 mph, a 1.5 mph difference.
- Spartan Shield HD 54 in Zero Turn Mower lists at A$12,999; Z254F lists at A$11,499, a A$1,500 difference.
- Spartan Shield HD 54 in Zero Turn Mower has a 23 hp engine; Z254F has a 24 hp engine, a 1 hp difference.
- Spartan Shield HD 54 in Zero Turn Mower has a 1,410 mm (55.5 in) deck; Z254F has a 1,372 mm (54 in) deck, a 38 mm difference.
Calculated by MowerFacts
- Spartan Shield HD 54 in Zero Turn Mower works out to 1.44 ha/hour; Z254F works out to 1.15 ha/hour, a 0.30 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Displacement: not published for Spartan Shield HD 54 in Zero Turn Mower.
- Warranty: not published for Z254F.
- Fuel Type: not published for Z254F.
- Deck Material: not published for Spartan Shield HD 54 in Zero Turn Mower.
- Deck Construction: not published for Z254F.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Spartan Shield HD 54 in Zero Turn Mower Spartan · Zero-Turn |
Z254F Husqvarna · Zero-Turn |
|---|---|---|
| RRP (AUD) | A$12,999 | A$11,499 |
| Engine | ||
| Power Source | gas | gas |
| Displacement | — | 44.3 ci (725.9 cc) |
| Engine Power | 23 hp | 24 hp |
| Engine Make | Air cooled, 90-degree V-Twin, normally aspirated petrol engine | Kawasaki |
| Engine Model | — | FR Series |
| Fuel Type | Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications) | — |
| Cylinders | — | 2 |
| Deck | ||
| Cutting Width | 55.5 in (1410 mm) | 54 in (1372 mm) |
| Blades | 3 | 3 |
| Min Cut Height | 1 in (25 mm) | 1.5 in (38 mm) |
| Max Cut Height | 5 in (127 mm) | 4 in (102 mm) |
| Deck Material | — | Steel |
| Deck Construction | 4” Deep, Fabricated | — |
| Spindle Type | Cast aluminium sealed bearings | — |
| Anti-Scalp Rollers | — | Yes |
| Discharge | High density, rubberised | Collect/Mulch/Side discharge |
| Cut Positions | — | 6 |
| Drive | ||
| Transmission | V-belt drive from engine crankshaft | Hydrostatic |
| Ground Speed | 8 mph | 6.5 mph |
| Drive Tire Size | 20" turf armour tyres | — |
| Dimensions | ||
| Weight | 719 lbs (326 kg) | 590 lbs (267.6 kg) |
| Fuel Capacity | 5 gal (18.9 L) | 3.5 gal (13.2 L) |
| Length | 81 in (2057 mm) | 75 in (1905 mm) |
| Height | 44 in (1118 mm) | 40 in (1016 mm) |
| Commercial / Pro | ||
| Frame Construction | Mainframe 1.5” x 3” (38.1 mm x 76.2 mm) powder coated fusion welded tube frame. Front caster wheels mounted with commercial duty greaseable roller bearings on each wheel | — |
| Seat Type | Premium | 15" high back |
| Commercial Warranty | 3 Year or 300 Hour Domestic Warranty | — |
| General | ||
| Warranty | 3 yr | — |
Where these models differ, explained
Z254F: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — husqvarna.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.