Compare Mowers
Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Toro 32 in GrandStand HDM — commercial: daily paid use and high acreage; 32-inch deck; gas powered
- Toro 36 in GrandStand — commercial: daily paid use and high acreage; 36-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- 32 in GrandStand HDM holds 18.9 L (5 gal) of fuel; 36 in GrandStand holds 29.5 L (7.8 gal) of fuel, a 10.6 L difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- 32 in GrandStand HDM has a 18.5 hp engine; 36 in GrandStand has a 15 hp engine, a 3.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
- 32 in GrandStand HDM has a 813 mm (32 in) deck; 36 in GrandStand has a 914 mm (36 in) deck, a 101 mm difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
- 32 in GrandStand HDM carries a 4-year warranty; 36 in GrandStand carries a 5-year warranty, a 1 year difference. Warranty length is the maker's published term. Conditions and commercial-use limits differ between makers.
- 32 in GrandStand HDM has a published top speed of 7.5 mph; 36 in GrandStand has a published top speed of 8 mph, a 0.6 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
1 more difference, calculated figures
Other verified differences
- 32 in GrandStand HDM cuts from 25 mm (1 in) to 114 mm (4.5 in); 36 in GrandStand cuts from 38 mm (1.5 in) to 127 mm (5 in).
Calculated by MowerFacts
- 32 in GrandStand HDM works out to 0.78 ha/hour; 36 in GrandStand works out to 0.94 ha/hour, a 0.16 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | 32 in GrandStand HDM Toro · Commercial |
36 in GrandStand Toro · Commercial |
|---|---|---|
| RRP (AUD) | dealer quote | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Displacement | 36.8 ci (603 cc) | 36.8 ci (603 cc) |
| Engine Power | 18.5 hp | 15 hp |
| Deck | ||
| Cutting Width | 32 in (813 mm) | 36 in (914 mm) |
| Deck Construction | 7 Gauge TURBO FORCE® deck with the i-beam front end | TURBO FORCE® 7-gauge high-strength steel with bull-nose front bumper |
| Discharge | Rubber | Rubber |
| Min Cut Height | 1 in (25 mm) | 1.5 in (38 mm) |
| Max Cut Height | 4.5 in (114 mm) | 5 in (127 mm) |
| Blade Tip Speed | 18497 ft/min (5638 m/min) | — |
| Drive | ||
| Ground Speed | 7.5 mph | 8 mph |
| Drive System | Rear-Wheel Drive | Hydro-Gear 10.2 cc pumps and Parker Ross 195 cc motors |
| Dimensions | ||
| Fuel Capacity | 5 gal (18.9 L) | 7.8 gal (29.5 L) |
| General | ||
| Warranty | 4 yr | 5 yr |
Where these models differ, explained
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.