MowerFacts
Home › Australia › Compare

Compare Mowers

Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Toro 52 in GrandStand — commercial: daily paid use and high acreage; 52-inch deck; gas powered
  • Kubota ZG227-54 — commercial: daily paid use and high acreage; 54-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. 52 in GrandStand holds 40.1 L (10.6 gal) of fuel; ZG227-54 holds 28 L (7.4 gal) of fuel, a 12.1 L difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  2. 52 in GrandStand has a 22 hp engine; ZG227-54 has a 27 hp engine, a 5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
  3. 52 in GrandStand cuts from 38 mm (1.5 in) to 127 mm (5 in); ZG227-54 cuts from 25 mm (1 in) to 127 mm (5 in). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
  4. 52 in GrandStand has a published top speed of 9.9 mph; ZG227-54 has a published top speed of 9 mph, a 0.9 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  5. 52 in GrandStand has a 1,321 mm (52 in) deck; ZG227-54 has a 1,372 mm (54 in) deck, a 51 mm difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
1 more difference, calculated figures and what isn’t comparable

Other verified differences

  • 52 in GrandStand has a 726 cc (44.3 ci) engine; ZG227-54 has a 768 cc (46.9 ci) engine, a 42 cc difference.

Calculated by MowerFacts

  • 52 in GrandStand works out to 1.69 ha/hour; ZG227-54 works out to 1.59 ha/hour, a 0.10 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Weight: not published for 52 in GrandStand.
  • Warranty: not published for ZG227-54.
  • Bagger Capacity: not published for 52 in GrandStand.
  • Blades: not published for 52 in GrandStand.
  • Engine Make: not published for 52 in GrandStand.
  • Transmission: not published for 52 in GrandStand.
  • Fuel Type: not published for 52 in GrandStand.
  • Discharge: not published for ZG227-54.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every commercial mower sold in Australia · more Toro · more Kubota
Side-by-side specifications: Toro 52 in GrandStand vs Kubota ZG227-54
Spec 52 in GrandStand
Toro · Commercial
ZG227-54
Kubota · Commercial
RRP (AUD) dealer quotedealer quote
Engine
Power Source gas gas
Engine Make — Kubota KGZ770-E2-MA2
Displacement 44.3 ci (726 cc) 46.9 ci (768 cc)
Engine Power 22 hp 27 hp
Fuel Type — Petrol
Deck
Cutting Width 52 in (1321 mm) 54 in (1372 mm)
Blades — 3
Deck Construction TURBO FORCE® 7-gauge high-strength steel with bull-nose front bumper Pro commercial - Fabricated deck
Min Cut Height 1.5 in (38 mm) 1 in (25 mm)
Blade Tip Speed — 18100 ft/min (5517 m/min)
Discharge Rubber —
Max Cut Height 5 in (127 mm) 5 in (127 mm)
Drive
Transmission — Integral Type HST, Shaft Driven
Ground Speed 9.9 mph 9 mph
Drive Tire Size — 23×10.5-12
Reverse Speed — 5 mph
Drive System Twin Turf Torque unitized transaxles with cooling fans Adjustable Dual Lever Steering
Dimensions
Weight — 1190 lbs (540 kg)
Fuel Capacity 10.6 gal (40.1 L) 7.4 gal (28 L)
Length — 82.5 in (2096 mm)
Width — 67.3 in (1710 mm)
Height — 69.9 in (1775 mm)
General
Warranty 5 yr —
Bagger Capacity — 8 bu (282 L)

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction