MowerFacts
Home › Australia › Compare

Compare Mowers

Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Toro 60 in GrandStand Multi Force — commercial: daily paid use and high acreage; 60-inch deck; gas powered
  • Husqvarna Z560X — commercial: daily paid use and high acreage; 60-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. 60 in GrandStand Multi Force has a 747 cc (45.6 ci) engine; Z560X has a 999.6 cc (61 ci) engine, a 252.6 cc difference. Displacement is the engine's size, not its output. A larger engine is not necessarily a more powerful one.
  2. 60 in GrandStand Multi Force has Rubber discharge; Z560X has Collect/Mulch/Side discharge discharge.
  3. 60 in GrandStand Multi Force has a 26.5 hp engine; Z560X has a 31 hp engine, a 4.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
  4. 60 in GrandStand Multi Force has a published top speed of 10 mph; Z560X has a published top speed of 12 mph, a 2 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  5. 60 in GrandStand Multi Force holds 39.8 L (10.5 gal) of fuel; Z560X holds 45.4 L (12 gal) of fuel, a 5.7 L difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
1 more difference, calculated figures and what isn’t comparable

Other verified differences

  • 60 in GrandStand Multi Force cuts from 38 mm (1.5 in) to 127 mm (5 in); Z560X cuts from 25 mm (1 in) to 127 mm (5 in).

Calculated by MowerFacts

  • 60 in GrandStand Multi Force works out to 1.96 ha/hour; Z560X works out to 2.35 ha/hour, a 0.39 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Weight: not published for 60 in GrandStand Multi Force.
  • Warranty: not published for Z560X.
  • Blades: not published for 60 in GrandStand Multi Force.
  • Engine Make: not published for 60 in GrandStand Multi Force.
  • Transmission: not published for 60 in GrandStand Multi Force.
  • Deck Material: not published for 60 in GrandStand Multi Force.
  • Deck Construction: not published for Z560X.
  • Drive System: not published for Z560X.
  • Price: 60 in GrandStand Multi Force is dealer quote only.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every commercial mower sold in Australia · more Toro · more Husqvarna
Side-by-side specifications: Toro 60 in GrandStand Multi Force vs Husqvarna Z560X
Spec 60 in GrandStand Multi Force
Toro · Commercial
Z560X
Husqvarna · Commercial
RRP (AUD) dealer quoteA$26,499
Engine
Power Source gas gas
Engine Make — Kawasaki
Displacement 45.6 ci (747 cc) 61 ci (999.6 cc)
Engine Power 26.5 hp 31 hp
Cylinders — 2
Engine Model — FX Series V-Twin
Deck
Cutting Width 60 in (1524 mm) 60 in (1524 mm)
Blades — 3
Deck Material — Steel
Deck Construction TURBO FORCE® 7-gauge high-strength steel with bull-nose front bumper —
Anti-Scalp Rollers — Yes
Min Cut Height 1.5 in (38 mm) 1 in (25 mm)
Discharge Rubber Collect/Mulch/Side discharge
Cut Positions — 16
Max Cut Height 5 in (127 mm) 5 in (127 mm)
Drive
Transmission — Hydrostatic
Ground Speed 10 mph 12 mph
Drive System Integrated hydraulics (no hoses) —
Dimensions
Weight — 1309 lbs (593.8 kg)
Fuel Capacity 10.5 gal (39.8 L) 12 gal (45.4 L)
Length — 81 in (2057 mm)
Height — 21 in (533 mm)
Commercial / Pro
Seat Type — Premium, suspension
General
Warranty 5 yr —

Z560X: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — husqvarna.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction