Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Cub Cadet ZTS1 46 — prosumer: larger home properties and light acreage; 46-inch deck; gas powered
- Cub Cadet ZTS1 50 — prosumer: larger home properties and light acreage; 50-inch deck; gas powered
What’s different? The 3 differences that matter most, from the published figures.
- ZTS1 46 has 2 blades; ZTS1 50 has 3 blades.
- ZTS1 46 has a 46 in (1,168 mm) deck; ZTS1 50 has a 50 in (1,270 mm) deck, a 4 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
- ZTS1 46 has a 22 hp engine; ZTS1 50 has a 24 hp engine, a 2 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
calculated figures
Calculated by MowerFacts
- ZTS1 46 works out to 2.6 acres/hour; ZTS1 50 works out to 2.8 acres/hour, a 0.2 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | ZTS1 46 Cub Cadet · Zero-Turn |
ZTS1 50 Cub Cadet · Zero-Turn |
|---|---|---|
| List price | $4,999 | $5,099 |
| Engine | ||
| Power Source | gas | gas |
| Displacement | 45.6 ci (747 cc) | 45.6 ci (747 cc) |
| Engine Power | 22 hp | 24 hp |
| Engine Make | Kohler® | Kohler® |
| Engine Model | 7000 Series | 7000 Series |
| Cylinders | 2 | 2 |
| Start Type | Ignition Key | Ignition Key |
| Deck | ||
| Cutting Width | 46 in (1168 mm) | 50 in (1270 mm) |
| Blades | 2 | 3 |
| Min Cut Height | 1 in (25 mm) | 1 in (25 mm) |
| Max Cut Height | 4.5 in (114 mm) | 4.5 in (114 mm) |
| Deck Material | 11-gauge steel | 11-gauge steel |
| Deck Construction | Fabricated | Fabricated |
| Deck Gauge | 11 | 11 |
| Cut Positions | 15 | 15 |
| Drive | ||
| Transmission | Hydro-Gear EZT 2200 | Hydro-Gear EZT 2200 |
| Ground Speed | 7 mph | 7 mph |
| Reverse Speed | 3.5 mph | 3.5 mph |
| Drive System | Hydrostatic | Hydrostatic |
| Dimensions | ||
| Fuel Capacity | 3.5 gal (13.2 L) | 3.5 gal (13.2 L) |
| General | ||
| Warranty | 3 yr | 3 yr |
Where these models differ, explained
ZTS1 46: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — cubcadet.com.
ZTS1 50: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — cubcadet.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.