Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Dixie Chopper Falcon HPX 48 in (2448KW) — commercial: daily paid use and high acreage; 48-inch deck; gas powered
- Scag Freedom Z — commercial: daily paid use and high acreage; 48-inch deck; gas powered
What’s different? The 2 differences that matter most, from the published figures.
- Falcon HPX 48 in (2448KW) uses a Kawasaki® FT engine; Freedom Z uses a Kohler® 7000 Series engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- Falcon HPX 48 in (2448KW) holds 5.5 gal (20.8 L) of fuel; Freedom Z holds 6.5 gal (24.6 L) of fuel, a 1 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
what isn’t comparable
Not comparable
- Weight: not published for Falcon HPX 48 in (2448KW).
- Ground Speed: not published for Falcon HPX 48 in (2448KW).
- Transmission: not published for Freedom Z.
- Deck Construction: not published for Falcon HPX 48 in (2448KW).
- Drive System: not published for Falcon HPX 48 in (2448KW).
- Cut height range: not published for Falcon HPX 48 in (2448KW).
- Price: Falcon HPX 48 in (2448KW) is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Falcon HPX 48 in (2448KW) Dixie Chopper · Zero-Turn |
Freedom Z Scag · Zero-Turn |
|---|---|---|
| List price | dealer quote | $6,899–$7,799 |
| Engine | ||
| Power Source | gas | gas |
| Engine Power | 24 hp | 24 hp |
| Engine Make | Kawasaki® FT | Kohler® 7000 Series |
| Deck | ||
| Cutting Width | 48 in (1219 mm) | 48 in (1219 mm) |
| Min Cut Height | — | 1.5 in (38 mm) |
| Max Cut Height | — | 4.5 in (114 mm) |
| Deck Construction | — | Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles. |
| Drive | ||
| Transmission | Hydro-Gear ZT-3200 | — |
| Ground Speed | — | 8 mph |
| Drive Tire Size | — | 20″ x 10″-10″ |
| Drive System | — | Hydro-Gear ZT2800 Transaxle |
| Reverse Speed | — | 5 mph |
| Dimensions | ||
| Weight | — | 745 lbs (337.9 kg) |
| Fuel Capacity | 5.5 gal (20.8 L) | 6.5 gal (24.6 L) |
| Commercial / Pro | ||
| Seat Type | — | Padded with arm rests, adjustment forward and back (tools required) |
Where these models differ, explained
Freedom Z: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.