MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Ferris FW25 Walk Behind Mower (36 in / 5901886) — commercial: daily paid use and high acreage; 36-inch deck; gas powered
  • Scag SWZT Hydro-Drive — commercial: daily paid use and high acreage; 36-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. FW25 Walk Behind Mower (36 in / 5901886) uses a Kawasaki® FS600V engine; SWZT Hydro-Drive uses a Kawasaki® FS Series engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
  2. FW25 Walk Behind Mower (36 in / 5901886) has a 18.5 hp engine; SWZT Hydro-Drive has a 14 hp engine, a 4.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
  3. FW25 Walk Behind Mower (36 in / 5901886) lists at $8,304; SWZT Hydro-Drive lists at $6,499 to $7,999, a $1,805 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
  4. FW25 Walk Behind Mower (36 in / 5901886) has a published top speed of 6 mph; SWZT Hydro-Drive has a published top speed of 7 mph, a 1 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  5. FW25 Walk Behind Mower (36 in / 5901886) weighs 632 lbs (286.7 kg); SWZT Hydro-Drive weighs 550 lbs (249.5 kg), a 82 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What FW25 Walk Behind Mower (36 in / 5901886)'s weight means for a trailer ›
1 more difference, calculated figures and what isn’t comparable

Other verified differences

  • FW25 Walk Behind Mower (36 in / 5901886) holds 5 gal (18.9 L) of fuel; SWZT Hydro-Drive holds 5.5 gal (20.8 L) of fuel, a 0.5 gal difference.

Calculated by MowerFacts

  • FW25 Walk Behind Mower (36 in / 5901886) works out to 1.7 acres/hour; SWZT Hydro-Drive works out to 2.0 acres/hour, a 0.3 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Displacement: not published for SWZT Hydro-Drive.
  • Warranty: not published for SWZT Hydro-Drive.
  • Transmission: not published for SWZT Hydro-Drive.
  • Fuel Type: not published for SWZT Hydro-Drive.
  • Deck Material: not published for SWZT Hydro-Drive.
  • Deck Construction: not published for FW25 Walk Behind Mower (36 in / 5901886).
  • Drive System: not published for FW25 Walk Behind Mower (36 in / 5901886).
  • Start Type: not published for SWZT Hydro-Drive.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every push / walk-behind mower · more Ferris · more Scag
Side-by-side specifications: Ferris FW25 Walk Behind Mower (36 in / 5901886) vs Scag SWZT Hydro-Drive
Spec FW25 Walk Behind Mower (36 in / 5901886)
Ferris · Push / Walk-Behind
SWZT Hydro-Drive
Scag · Push / Walk-Behind
List price $8,304$6,499–$7,999
Engine
Power Source gas gas
Displacement 36.8 ci (603 cc) —
Engine Power 18.5 hp 14 hp
Cylinders 2 —
Start Type Electric —
Fuel Type Gas —
Engine Make Kawasaki® FS600V Kawasaki® FS Series
Deck
Cutting Width 36 in (914 mm) 36 in (914 mm)
Min Cut Height 1.5 in (38 mm) 1.5 in (38 mm)
Max Cut Height 4.5 in (114 mm) 4.5 in (114 mm)
Deck Material 10-gauge, Fabricated —
Deck Construction — Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
Deck Gauge 10 —
Drive
Drive Tire Size — 18″ x 6.5″-8″ (36″)18″ x 8.5″-8″ (48″, 52″ and 61″)
Ground Speed 6 mph 7 mph
Transmission Dual, commercial Hydro-Gear® ZT-3100® transaxles with 7" mounted cooling fans —
Reverse Speed 3 mph 3 mph
Drive System — Hydro-Gear ZT2800 Transaxle
Dimensions
Weight 632 lbs (286.7 kg) 550 lbs (249.5 kg)
Fuel Capacity 5 gal (18.9 L) 5.5 gal (20.8 L)
Width — 48.5 in (1232 mm)
Length 73 in (1854 mm) 75.5 in (1918 mm)
Height — 44 in (1118 mm)
Commercial / Pro
Seat Type — n/a
General
Warranty 2 yr —

Where these models differ, explained

FW25 Walk Behind Mower (36 in / 5901886): Specs verified against the manufacturer spec sheet on Jun 6, 2026 — ferrismowers.com.

SWZT Hydro-Drive: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction