MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Ferris IS2600 Zero Turn Mower — commercial: daily paid use and high acreage; 61-inch deck
  • Ferris 300e Zero Turn Mower — commercial: daily paid use and high acreage; 42-inch deck; battery (no fuel or engine maintenance)
What’s different? The 5 differences that matter most, from the published figures.
  1. IS2600 Zero Turn Mower weighs 1,606 lbs (728.5 kg); 300e Zero Turn Mower weighs 651 lbs (295.3 kg), a 955 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What IS2600 Zero Turn Mower's weight means for a trailer ›
  2. IS2600 Zero Turn Mower carries a 2-year warranty; 300e Zero Turn Mower carries a 8-year warranty, a 6 years difference. Warranty length is the maker's published term. Conditions and commercial-use limits differ between makers.
  3. IS2600 Zero Turn Mower has a 61 in (1,549 mm) deck; 300e Zero Turn Mower has a 42 in (1,067 mm) deck, a 19 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
  4. IS2600 Zero Turn Mower has a published top speed of 10 mph; 300e Zero Turn Mower has a published top speed of 7 mph, a 3 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  5. IS2600 Zero Turn Mower cuts from 1.7 in (44 mm) to 5 in (127 mm); 300e Zero Turn Mower cuts from 1.5 in (38 mm) to 4.5 in (114 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
calculated figures and what isn’t comparable

Calculated by MowerFacts

  • IS2600 Zero Turn Mower works out to 4.9 acres/hour; 300e Zero Turn Mower works out to 2.4 acres/hour, a 2.6 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Engine Power: not published for 300e Zero Turn Mower.
  • Voltage: not published for IS2600 Zero Turn Mower.
  • Displacement: not published for 300e Zero Turn Mower.
  • Fuel Capacity: not published for 300e Zero Turn Mower.
  • Engine Make: not published for 300e Zero Turn Mower.
  • Transmission: not published for 300e Zero Turn Mower.
  • Fuel Type: not published for 300e Zero Turn Mower.
  • Deck Material: not published for 300e Zero Turn Mower.
  • Deck Construction: not published for 300e Zero Turn Mower.
  • Start Type: not published for 300e Zero Turn Mower.
  • Price: 300e Zero Turn Mower is dealer quote only.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every zero-turn mower · more Ferris
Side-by-side specifications: Ferris IS2600 Zero Turn Mower vs Ferris 300e Zero Turn Mower
Spec IS2600 Zero Turn Mower
Ferris · Zero-Turn
300e Zero Turn Mower
Ferris · Zero-Turn
List price $24,914dealer quote
Engine
Power Source diesel battery
Displacement 55.2 ci (904 cc) —
Engine Power 23 hp —
Engine Make Yanmar™ diesel —
Fuel Type Diesel —
Cylinders 3 —
Start Type Electric —
Electrical
Voltage — 48 V
Deck
Cutting Width 61 in (1549 mm) 42 in (1067 mm)
Min Cut Height 1.7 in (44 mm) 1.5 in (38 mm)
Max Cut Height 5 in (127 mm) 4.5 in (114 mm)
Deck Material iCD™ Cutting System —
Deck Construction iCD™ Cutting System —
Drive
Transmission Dual commercial Hydro-Gear® ZT-4400™ Transaxles with 8.3" cooling fans —
Ground Speed 10 mph 7 mph
Reverse Speed 6 mph —
Dimensions
Weight 1606 lbs (728.5 kg) 651 lbs (295.3 kg)
Fuel Capacity 11 gal (41.6 L) —
Length 86.3 in (2191 mm) —
General
Warranty 2 yr 8 yr

IS2600 Zero Turn Mower: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — ferrismowers.com.

300e Zero Turn Mower: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — ferrismowers.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction