MowerFacts
Home › Compare

Compare Mowers

These mowers are in different classes — showing only attributes they share.

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Ferris IS600 Zero Turn Mower — commercial: daily paid use and high acreage; 48-inch deck; gas powered
  • Wright Stander ZK 72 61G8 — commercial: daily paid use and high acreage; 72-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. IS600 Zero Turn Mower has a 18.5 hp engine; Stander ZK 72 61G8 has a 40 hp engine, a 21.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
  2. IS600 Zero Turn Mower holds 6 gal (22.7 L) of fuel; Stander ZK 72 61G8 holds 15.5 gal (58.7 L) of fuel, a 9.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  3. IS600 Zero Turn Mower uses a Kawasaki® FS600V engine; Stander ZK 72 61G8 uses a Briggs & Stratton engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
  4. IS600 Zero Turn Mower has a 48 in (1,219 mm) deck; Stander ZK 72 61G8 has a 72 in (1,829 mm) deck, a 24 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
  5. IS600 Zero Turn Mower has a 36.8 ci (603 cc) engine; Stander ZK 72 61G8 has a 60.6 ci (993 cc) engine, a 23.8 ci difference. Displacement is the engine's size, not its output. A larger engine is not necessarily a more powerful one.
4 more differences, calculated figures and what isn’t comparable

Other verified differences

  • IS600 Zero Turn Mower weighs 942 lbs (427.3 kg); Stander ZK 72 61G8 weighs 1,260 lbs (571.5 kg), a 318 lbs difference.
  • IS600 Zero Turn Mower has a 10-gauge, Fabricated deck; Stander ZK 72 61G8 has a Floating-side discharge deck.
  • IS600 Zero Turn Mower has a published top speed of 10 mph; Stander ZK 72 61G8 has a published top speed of 12.5 mph, a 2.5 mph difference.
  • IS600 Zero Turn Mower cuts from 1.5 in (38 mm) to 4.5 in (114 mm); Stander ZK 72 61G8 cuts from 1.5 in (38 mm) to 5.5 in (140 mm).

Calculated by MowerFacts

  • IS600 Zero Turn Mower works out to 3.9 acres/hour; Stander ZK 72 61G8 works out to 7.3 acres/hour, a 3.4 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Price: Stander ZK 72 61G8 is dealer quote only.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every zero-turn mower · more Ferris · more Wright
Side-by-side specifications: Ferris IS600 Zero Turn Mower vs Wright Stander ZK 72 61G8
Spec IS600 Zero Turn Mower
Ferris · Zero-Turn
Stander ZK 72 61G8
Wright · Commercial
List price $9,294dealer quote
Engine
Power Source gas gas
Displacement 36.8 ci (603 cc) 60.6 ci (993 cc)
Engine Power 18.5 hp 40 hp
Engine Make Kawasaki® FS600V Briggs & Stratton
Fuel Type Gas Gasoline
Start Type Electric Electric
Deck
Cutting Width 48 in (1219 mm) 72 in (1829 mm)
Min Cut Height 1.5 in (38 mm) 1.5 in (38 mm)
Max Cut Height 4.5 in (114 mm) 5.5 in (140 mm)
Deck Construction 10-gauge, Fabricated Floating-side discharge
Drive
Transmission Dual commercial Hydro-Gear® ZT-3200® transaxles with 7" cooling fans Hydro
Ground Speed 10 mph 12.5 mph
Reverse Speed 5 mph 7 mph
Dimensions
Weight 942 lbs (427.3 kg) 1260 lbs (571.5 kg)
Fuel Capacity 6 gal (22.7 L) 15.5 gal (58.7 L)
Length 80 in (2032 mm) 72 in (1829 mm)

IS600 Zero Turn Mower: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — ferrismowers.com.

Stander ZK 72 61G8: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction