Compare Mowers
Discontinued model in this comparison: Husqvarna Xcite Z375 60 in (last listed October 2026). It is no longer sold new, and its price is the last one published rather than one you can pay today. The specifications are still accurate and still worth comparing against.
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Husqvarna Xcite Z375 60 in Discontinued — prosumer: larger home properties and light acreage; 60-inch deck
- Ariens ZENITH 60 - KAWASAKI — prosumer: larger home properties and light acreage; 60-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Xcite Z375 60 in uses a Kohler engine; ZENITH 60 - KAWASAKI uses a Kawasaki® FX730V engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- Xcite Z375 60 in holds 4.3 gal (16.3 L) of fuel; ZENITH 60 - KAWASAKI holds 5.1 gal (19.3 L) of fuel, a 0.8 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- Xcite Z375 60 in has a 26 hp engine; ZENITH 60 - KAWASAKI has a 23.5 hp engine, a 2.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
- Xcite Z375 60 in has a published top speed of 9 mph; ZENITH 60 - KAWASAKI has a published top speed of 8 mph, a 1 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- Xcite Z375 60 in cuts from 1.5 in (38 mm) to 4.5 in (114 mm); ZENITH 60 - KAWASAKI cuts from 1.5 in (38 mm) to 5 in (127 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
2 more differences, calculated figures and what isn’t comparable
Other verified differences
- Xcite Z375 60 in weighs 873 lbs (396 kg); ZENITH 60 - KAWASAKI weighs 900 lbs (408.2 kg), a 27 lbs difference.
- Xcite Z375 60 in has a 45.6 ci (747 cc) engine; ZENITH 60 - KAWASAKI has a 44.3 ci (726 cc) engine, a 1.3 ci difference.
Calculated by MowerFacts
- Xcite Z375 60 in works out to 4.4 acres/hour; ZENITH 60 - KAWASAKI works out to 3.9 acres/hour, a 0.5 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Warranty: not published for Xcite Z375 60 in.
- Blades: not published for Xcite Z375 60 in.
- Transmission: not published for Xcite Z375 60 in.
- Drive System: not published for Xcite Z375 60 in.
- Price: Xcite Z375 60 in is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Xcite Z375 60 in
Discontinued Husqvarna · Zero-Turn |
ZENITH 60 - KAWASAKI Ariens · Zero-Turn |
|---|---|---|
| List price | dealer quote | $8,299 |
| Engine | ||
| Power Source | — | gas |
| Displacement | 45.6 ci (747 cc) | 44.3 ci (726 cc) |
| Engine Power | 26 hp | 23.5 hp |
| Engine Make | Kohler | Kawasaki® FX730V |
| Engine Model | 7000 Series Pro | — |
| Deck | ||
| Cutting Width | 60 in (1524 mm) | 60 in (1524 mm) |
| Blades | — | 3 |
| Min Cut Height | 1.5 in (38 mm) | 1.5 in (38 mm) |
| Max Cut Height | 4.5 in (114 mm) | 5 in (127 mm) |
| Blade Tip Speed | — | 18465 ft/min (5628 m/min) |
| Cut Positions | — | 15 |
| Drive | ||
| Transmission | — | Hydrostatic |
| Ground Speed | 9 mph | 8 mph |
| Reverse Speed | — | 4 mph |
| Drive System | — | Hydro-Gear® ZT-3100® Transaxles |
| Dimensions | ||
| Weight | 873 lbs (396 kg) | 900 lbs (408.2 kg) |
| Fuel Capacity | 4.3 gal (16.3 L) | 5.1 gal (19.3 L) |
| Length | — | 79 in (2007 mm) |
| General | ||
| Warranty | — | 4 yr |
Where these models differ, explained
Xcite Z375 60 in: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — husqvarna.com.
ZENITH 60 - KAWASAKI: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — manualslib.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.