Compare Mowers
Discontinued model in this comparison: Husqvarna Xcite Z375 60 in (last listed October 2026). It is no longer sold new, and its price is the last one published rather than one you can pay today. The specifications are still accurate and still worth comparing against.
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Husqvarna Xcite Z375 60 in Discontinued — prosumer: larger home properties and light acreage; 60-inch deck
- Husqvarna MZ 48 Special Edition — commercial: daily paid use and high acreage; 48-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Xcite Z375 60 in uses a Kohler engine; MZ 48 Special Edition uses a Kawasaki engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- Xcite Z375 60 in has a 60 in (1,524 mm) deck; MZ 48 Special Edition has a 48 in (1,219 mm) deck, a 12 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
- Xcite Z375 60 in weighs 873 lbs (396 kg); MZ 48 Special Edition weighs 740 lbs (335.7 kg), a 133 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Xcite Z375 60 in's weight means for a trailer ›
- Xcite Z375 60 in has a 26 hp engine; MZ 48 Special Edition has a 23 hp engine, a 3 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
- Xcite Z375 60 in holds 4.3 gal (16.3 L) of fuel; MZ 48 Special Edition holds 5 gal (18.9 L) of fuel, a 0.7 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
2 more differences, calculated figures and what isn’t comparable
Other verified differences
- Xcite Z375 60 in has a published top speed of 9 mph; MZ 48 Special Edition has a published top speed of 8.5 mph, a 0.5 mph difference.
- Xcite Z375 60 in has a 45.6 ci (747 cc) engine; MZ 48 Special Edition has a 44.2 ci (724.3 cc) engine, a 1.4 ci difference.
Calculated by MowerFacts
- Xcite Z375 60 in works out to 4.4 acres/hour; MZ 48 Special Edition works out to 3.3 acres/hour, a 1.1 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Blades: not published for Xcite Z375 60 in.
- Transmission: not published for Xcite Z375 60 in.
- Deck Material: not published for Xcite Z375 60 in.
- Discharge: not published for Xcite Z375 60 in.
- Price: Xcite Z375 60 in is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Xcite Z375 60 in
Discontinued Husqvarna · Zero-Turn |
MZ 48 Special Edition Husqvarna · Zero-Turn |
|---|---|---|
| List price | dealer quote | $5,999 |
| Engine | ||
| Power Source | — | gas |
| Displacement | 45.6 ci (747 cc) | 44.2 ci (724.3 cc) |
| Engine Power | 26 hp | 23 hp |
| Engine Make | Kohler | Kawasaki |
| Engine Model | 7000 Series Pro | FR Series |
| Cylinders | — | 2 |
| Deck | ||
| Cutting Width | 60 in (1524 mm) | 48 in (1219 mm) |
| Blades | — | 3 |
| Min Cut Height | 1.5 in (38 mm) | 1.5 in (38 mm) |
| Max Cut Height | 4.5 in (114 mm) | 4.5 in (114 mm) |
| Deck Material | — | Steel |
| Anti-Scalp Rollers | — | Yes |
| Discharge | — | Collect/Mulch/Side discharge |
| Cut Positions | — | 13 |
| Drive | ||
| Transmission | — | Hydrostatic |
| Ground Speed | 9 mph | 8.5 mph |
| Dimensions | ||
| Weight | 873 lbs (396 kg) | 740 lbs (335.7 kg) |
| Fuel Capacity | 4.3 gal (16.3 L) | 5 gal (18.9 L) |
| Length | — | 75.5 in (1918 mm) |
| Height | — | 42 in (1067 mm) |
| Commercial / Pro | ||
| Seat Type | — | Full suspension, arm rests |
Xcite Z375 60 in: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — husqvarna.com.
MZ 48 Special Edition: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — husqvarna.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.