MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Scag Freedom Z — commercial: daily paid use and high acreage; 48-inch deck; gas powered
  • Scag EVZ — commercial: daily paid use and high acreage; 52-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. Freedom Z lists at $6,899 to $7,799; EVZ lists at $13,999, a $7,100 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
  2. Freedom Z has Hydro-Gear ZT2800 Transaxle drive; EVZ has Hydro-Gear ZT-2800e™ Electric Transaxles (52″) drive.
  3. Freedom Z has a published top speed of 8 mph; EVZ has a published top speed of 7 mph, a 1 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  4. Freedom Z has a 48 in (1,219 mm) deck; EVZ has a 52 in (1,321 mm) deck, a 4 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
  5. Freedom Z weighs 745 lbs (337.9 kg); EVZ weighs 700 lbs (317.5 kg), a 45 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Freedom Z's weight means for a trailer ›
calculated figures and what isn’t comparable

Calculated by MowerFacts

  • Freedom Z works out to 3.1 acres/hour; EVZ works out to 2.9 acres/hour, a 0.2 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Engine Power: not published for EVZ.
  • Voltage: not published for Freedom Z.
  • Fuel Capacity: not published for EVZ.
  • Engine Make: not published for EVZ.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every zero-turn mower · more Scag
Side-by-side specifications: Scag Freedom Z vs Scag EVZ
Spec Freedom Z
Scag · Zero-Turn
EVZ
Scag · Zero-Turn
List price $6,899–$7,799$13,999
Engine
Power Source gas gas
Engine Power 24 hp —
Engine Make Kohler® 7000 Series —
Electrical
Voltage — 48 V
Deck
Cutting Width 48 in (1219 mm) 52 in (1321 mm)
Min Cut Height 1.5 in (38 mm) 1.5 in (38 mm)
Max Cut Height 4.5 in (114 mm) 4.5 in (114 mm)
Deck Construction Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles. Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
Drive
Ground Speed 8 mph 7 mph
Drive Tire Size 20″ x 10″-10″ 20″ x 10″-8″ (52″)
Reverse Speed 5 mph 4 mph
Drive System Hydro-Gear ZT2800 Transaxle Hydro-Gear ZT-2800e™ Electric Transaxles (52″)
Dimensions
Weight 745 lbs (337.9 kg) 700 lbs (317.5 kg)
Fuel Capacity 6.5 gal (24.6 L) —
Length — 67.5 in (1714 mm)
Width — 64.5 in (1638 mm)
Height — 43 in (1092 mm)
Commercial / Pro
Seat Type Padded with arm rests, adjustment forward and back (tools required) Padded, Thick Cushion with Extra Spring Support and Armrests

Freedom Z: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.

EVZ: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction