MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Scag SFC-21 — commercial: daily paid use and high acreage; 21-inch deck; gas powered
  • Scag SW Belt-Drive — commercial: daily paid use and high acreage; 32-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. SFC-21 lists at $1,699 to $2,049; SW Belt-Drive lists at $5,349 to $6,499, a $3,650 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
  2. SFC-21 has a 4 hp engine; SW Belt-Drive has a 14 hp engine, a 10 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
  3. SFC-21 holds 0.4 gal (1.4 L) of fuel; SW Belt-Drive holds 5.5 gal (20.8 L) of fuel, a 5.1 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  4. SFC-21 weighs 136 lbs (61.7 kg); SW Belt-Drive weighs 450 lbs (204.1 kg), a 314 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What SFC-21's weight means for a trailer ›
  5. SFC-21 uses a Honda engine; SW Belt-Drive uses a Kawasaki® FS Series engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
3 more differences, calculated figures and what isn’t comparable

Other verified differences

  • SFC-21 has a 21 in (533 mm) deck; SW Belt-Drive has a 32 in (813 mm) deck, a 11 in difference.
  • SFC-21 has a published top speed of 4.2 mph; SW Belt-Drive has a published top speed of 6 mph, a 1.8 mph difference.
  • SFC-21 cuts from 1.5 in (38 mm) to 4.5 in (114 mm); SW Belt-Drive cuts from 1.7 in (44 mm) to 4.5 in (114 mm).

Calculated by MowerFacts

  • SFC-21 works out to 0.7 acres/hour; SW Belt-Drive works out to 1.6 acres/hour, a 0.8 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Displacement: not published for SW Belt-Drive.
  • Transmission: not published for SW Belt-Drive.
  • Drive System: not published for SFC-21.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every push / walk-behind mower · more Scag
Side-by-side specifications: Scag SFC-21 vs Scag SW Belt-Drive
Spec SFC-21
Scag · Push / Walk-Behind
SW Belt-Drive
Scag · Push / Walk-Behind
List price $1,699–$2,049$5,349–$6,499
Engine
Power Source gas gas
Displacement 9.9 ci (163 cc) —
Engine Power 4 hp 14 hp
Cylinders 1 —
Engine Make Honda Kawasaki® FS Series
Deck
Cutting Width 21 in (533 mm) 32 in (813 mm)
Min Cut Height 1.5 in (38 mm) 1.7 in (44 mm)
Max Cut Height 4.5 in (114 mm) 4.5 in (114 mm)
Deck Construction 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped. Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
Drive
Transmission GT MG 512 transmission, 3-speed —
Ground Speed 4.2 mph 6 mph
Drive System — Belt Drive with 5-Speed Peerless Transmission
Drive Tire Size — 13″ x 5″-6″ (32″)13″ x 6.5″-6″ (36″, 48″ and 52″)
Reverse Speed — 2 mph
Dimensions
Weight 136 lbs (61.7 kg) 450 lbs (204.1 kg)
Fuel Capacity 0.4 gal (1.4 L) 5.5 gal (20.8 L)
Commercial / Pro
Seat Type — n/a

SFC-21: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.

SW Belt-Drive: Specs verified against the manufacturer spec sheet on Jun 7, 2026 — scag.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction