MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Scag SWZ Hydro-Drive — commercial: daily paid use and high acreage; 36-inch deck; gas powered
  • Scag SW Belt-Drive — commercial: daily paid use and high acreage; 32-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. SWZ Hydro-Drive lists at $8,449 to $11,329; SW Belt-Drive lists at $5,349 to $6,499, a $3,100 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
  2. SWZ Hydro-Drive has Dual Pump and Motor drive; SW Belt-Drive has Belt Drive with 5-Speed Peerless Transmission drive.
  3. SWZ Hydro-Drive has a published top speed of 7.4 mph; SW Belt-Drive has a published top speed of 6 mph, a 1.4 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  4. SWZ Hydro-Drive has a 36 in (914 mm) deck; SW Belt-Drive has a 32 in (813 mm) deck, a 4 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
  5. SWZ Hydro-Drive weighs 515 lbs (233.6 kg); SW Belt-Drive weighs 450 lbs (204.1 kg), a 65 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What SWZ Hydro-Drive's weight means for a trailer ›
calculated figures

Calculated by MowerFacts

  • SWZ Hydro-Drive works out to 2.2 acres/hour; SW Belt-Drive works out to 1.6 acres/hour, a 0.6 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every push / walk-behind mower · more Scag
Side-by-side specifications: Scag SWZ Hydro-Drive vs Scag SW Belt-Drive
Spec SWZ Hydro-Drive
Scag · Push / Walk-Behind
SW Belt-Drive
Scag · Push / Walk-Behind
List price $8,449–$11,329$5,349–$6,499
Engine
Power Source gas gas
Engine Power 14 hp 14 hp
Engine Make Kawasaki® FS Series Kawasaki® FS Series
Deck
Cutting Width 36 in (914 mm) 32 in (813 mm)
Min Cut Height 1.7 in (44 mm) 1.7 in (44 mm)
Max Cut Height 4.5 in (114 mm) 4.5 in (114 mm)
Deck Construction Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles. Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
Drive
Ground Speed 7.4 mph 6 mph
Drive Tire Size 16″ x 6.5″-8″ 13″ x 5″-6″ (32″)13″ x 6.5″-6″ (36″, 48″ and 52″)
Reverse Speed 3 mph 2 mph
Drive System Dual Pump and Motor Belt Drive with 5-Speed Peerless Transmission
Dimensions
Weight 515 lbs (233.6 kg) 450 lbs (204.1 kg)
Fuel Capacity 5.5 gal (20.8 L) 5.5 gal (20.8 L)
Commercial / Pro
Seat Type n/a n/a

Where these models differ, explained

SWZ Hydro-Drive: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.

SW Belt-Drive: Specs verified against the manufacturer spec sheet on Jun 7, 2026 — scag.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction