Scag SWZT Hydro-Drive
Push / Walk-Behind mower · Commercial-duty · Gas
$6,499–$7,999 Scag list price (configurations)
Manufacturer list price only — it excludes tax, freight, dealer setup and any local discount, and dealers set the final price.
- Weighs 550 lb
- On a 6×12 trailer 1,450 lb towed, single-axle 3,500 lb
- Mows an acre in 42 min (29 at top speed) How long for your yard? ›
- How these are worked out ›
The Scag SWZT Hydro-Drive is a commercial-grade gas walk-behind mower, built for daily professional use, with a 36-inch deck. It weighs 550 lb (249.5 kg).
At a glance
Compare similar mowers See how this mower compares with machines of a similar size and purpose.
Few close matches: the list also allows a wider deck range, other duty classes and discontinued models, each labelled.
Chosen by stated rules, not opinion: same class, a deck within 2 in of this one, the same kind of power and a compatible duty class, then the closest power, weight and price, with other makers preferred. Figures are the manufacturers’ published ones; nothing is estimated.
Engine
| Power Source | gas |
|---|---|
| Engine Power | 14 hp |
| Engine Make | Kawasaki® FS Series |
Deck
| Cutting Width | 36 in (914 mm) |
|---|---|
| Min Cut Height | 1.5 in (38 mm) |
| Max Cut Height | 4.5 in (114 mm) |
| Deck Construction | Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles. |
Drive
| Drive System | Hydro-Gear ZT2800 Transaxle |
|---|---|
| Drive Tire Size | 18″ x 6.5″-8″ (36″)18″ x 8.5″-8″ (48″, 52″ and 61″) |
| Ground Speed | 7 mph |
| Reverse Speed | 3 mph |
Dimensions
| Weight | 550 lbs (249.5 kg) |
|---|---|
| Fuel Capacity | 5.5 gal (20.8 L) |
| Height | 44 in (1118 mm) |
| Length | 75.5 in (1918 mm) |
| Width | 48.5 in (1232 mm) |
Commercial / Pro
| Seat Type | n/a |
|---|
Similar models
Other push / walk-behind mowers with comparable specs — including other brands — that buyers cross-shop with the SWZT Hydro-Drive.
Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.
See every mower with a Kawasaki FS Series engine ›
What the parts on this spec sheet mean
See all Scag mowers and specs ›
Spot a wrong spec? Suggest a correction.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.
What the specs work out to
Figures MowerFacts computes from Scag’s own numbers — not published by the manufacturer.
Mowing time
- ¼ acre11 min 7 min
- ½ acre21 min 15 min
- 1 acre42 min 29 min
- 2 acres1 h 24 min 59 min
- 5 acres3 h 30 min 2 h 27 min
About 42 min per acre at 1.43 acres/hour, mowing at 4.9 mph. The second figure is at the published 7.0 mph top speed (2.04 acres/hour) — faster than anyone really mows. About 7.9 acres per tank.
Weight & hauling
- Machine weight550 lb
- + 6×12 trailer900 lb
- Towed weight1,450 lb
- single-axle 3,500 lbCarries it, 2,050 lb spare
- tandem-axle 7,000 lbCarries it, 5,550 lb spare
Needs a single-axle 3,500 lb trailer and a vehicle rated to tow at least 1,450 lb.
Gate & trailer fit
- 32 in gateToo wide
- 36 in gateToo wide
- 48 in gateToo wide
Needs at least 49 in of clearance.
Power & run time
- Power per deck inch0.389 hp/in
- Run time per tank~5.5 h
Mowing times assume 1.43 acres/hour: deck width x 4.9 mph at 80% efficiency, which allows for overlap, turns and trimming. 4.9 mph is 70% of the 7.0 mph top speed Scag publishes - almost nobody mows flat out. The "at top speed" figure is the same sum at 7.0 mph, shown so you can see it.
Fit uses Scag's published overall width.
Towed weight adds a 900 lb allowance for a 6x12 open utility trailer to Scag's published machine weight. Your trailer's own weight is on its VIN plate. Tongue weight, axle placement and your vehicle's tow rating are still yours to check — this is the load, not a loading plan.
Run time assumes a typical 1 gal/hour burn at working load; real consumption varies with engine, load and cut.
Scag SWZT Hydro-Drive questions
What size deck is on the Scag SWZT Hydro-Drive?
The Scag SWZT Hydro-Drive has a 36-inch (914 mm) cutting deck.
What engine is in the Scag SWZT Hydro-Drive?
The Scag SWZT Hydro-Drive is powered by a Kawasaki® FS Series, 14 hp. Horsepower is the manufacturer's own rating.
How much does the Scag SWZT Hydro-Drive weigh?
The Scag SWZT Hydro-Drive weighs 550 lb (249.5 kg) as specified by Scag.
What size trailer do I need for the Scag SWZT Hydro-Drive?
At 550 lb, the Scag SWZT Hydro-Drive on a typical 6x12 open utility trailer (about 900 lb empty) is roughly 1,450 lb of towed weight. That is within a single-axle 3,500 lb trailer, and your tow vehicle needs to be rated for at least 1,450 lb. Tongue weight, axle placement and your own trailer's empty weight still have to be checked — this is the arithmetic, not a loading plan.
How fast is the Scag SWZT Hydro-Drive?
Top ground speed is 7 mph. With its 36-inch deck that works out to about 2.04 acres per hour at 80% efficiency — allowing for overlap, turns and trimming.
How long does the Scag SWZT Hydro-Drive take to mow an acre?
About 29 min per acre, from its 36-inch deck at 7 mph and 80% efficiency — roughly 2.04 acres an hour, so five acres is about 2 h 27 min. Rough or obstacle-heavy ground takes longer; this is deck width times ground speed, not a timed test.
How big is the fuel tank on the Scag SWZT Hydro-Drive?
The Scag SWZT Hydro-Drive holds 5.5 gal (20.8 L) of fuel.
How much does the Scag SWZT Hydro-Drive cost?
Scag's published list price is $6,499 to $7,999 depending on configuration, checked 23 October 2026. That excludes tax, freight, dealer setup and any local discount — dealers set the final price.
What is the Scag SWZT Hydro-Drive built for?
Commercial-duty push / walk-behind mower. Built for daily, paid commercial use.
Source: Scag (manufacturer) · archived copy