Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Scag SWZT Hydro-Drive — commercial: daily paid use and high acreage; 36-inch deck; gas powered
- Scag SFC-30 — commercial: daily paid use and high acreage; 30-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- SWZT Hydro-Drive lists at $6,499 to $7,999; SFC-30 lists at $2,999, a $3,500 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
- SWZT Hydro-Drive holds 5.5 gal (20.8 L) of fuel; SFC-30 holds 1 gal (3.8 L) of fuel, a 4.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- SWZT Hydro-Drive weighs 550 lbs (249.5 kg); SFC-30 weighs 220 lbs (99.8 kg), a 330 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What SWZT Hydro-Drive's weight means for a trailer ›
- SWZT Hydro-Drive has a 14 hp engine; SFC-30 has a 7 hp engine, a 7 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
- SWZT Hydro-Drive uses a Kawasaki® FS Series engine; SFC-30 uses a Kohler® Command PRO® CV224 engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
4 more differences, calculated figures and what isn’t comparable
Other verified differences
- SWZT Hydro-Drive has a published top speed of 7 mph; SFC-30 has a published top speed of 4 mph, a 3 mph difference.
- SWZT Hydro-Drive has Hydro-Gear ZT2800 Transaxle drive; SFC-30 has GT MV 702 Transmission drive.
- SWZT Hydro-Drive has a 36 in (914 mm) deck; SFC-30 has a 30 in (762 mm) deck, a 6 in difference.
- SWZT Hydro-Drive cuts from 1.5 in (38 mm) to 4.5 in (114 mm); SFC-30 cuts from 1.5 in (38 mm) to 5 in (127 mm).
Calculated by MowerFacts
- SWZT Hydro-Drive works out to 2.0 acres/hour; SFC-30 works out to 1.0 acres/hour, a 1.1 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Displacement: not published for SWZT Hydro-Drive.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | SWZT Hydro-Drive Scag · Push / Walk-Behind |
SFC-30 Scag · Push / Walk-Behind |
|---|---|---|
| List price | $6,499–$7,999 | $2,999 |
| Engine | ||
| Power Source | gas | gas |
| Displacement | — | 13.7 ci (224 cc) |
| Engine Power | 14 hp | 7 hp |
| Engine Make | Kawasaki® FS Series | Kohler® Command PRO® CV224 |
| Deck | ||
| Cutting Width | 36 in (914 mm) | 30 in (762 mm) |
| Min Cut Height | 1.5 in (38 mm) | 1.5 in (38 mm) |
| Max Cut Height | 4.5 in (114 mm) | 5 in (127 mm) |
| Deck Construction | Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles. | 14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts. |
| Drive | ||
| Ground Speed | 7 mph | 4 mph |
| Drive System | Hydro-Gear ZT2800 Transaxle | GT MV 702 Transmission |
| Drive Tire Size | 18″ x 6.5″-8″ (36″)18″ x 8.5″-8″ (48″, 52″ and 61″) | — |
| Reverse Speed | 3 mph | — |
| Dimensions | ||
| Weight | 550 lbs (249.5 kg) | 220 lbs (99.8 kg) |
| Fuel Capacity | 5.5 gal (20.8 L) | 1 gal (3.8 L) |
| Width | 48.5 in (1232 mm) | — |
| Length | 75.5 in (1918 mm) | — |
| Height | 44 in (1118 mm) | — |
| Commercial / Pro | ||
| Seat Type | n/a | — |
Where these models differ, explained
SWZT Hydro-Drive: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.
SFC-30: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.