MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Scag SWZT Hydro-Drive — commercial: daily paid use and high acreage; 36-inch deck; gas powered
  • Scag SWZ Hydro-Drive — commercial: daily paid use and high acreage; 36-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. SWZT Hydro-Drive lists at $6,499 to $7,999; SWZ Hydro-Drive lists at $8,449 to $11,329, a $1,950 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
  2. SWZT Hydro-Drive has Hydro-Gear ZT2800 Transaxle drive; SWZ Hydro-Drive has Dual Pump and Motor drive.
  3. SWZT Hydro-Drive weighs 550 lbs (249.5 kg); SWZ Hydro-Drive weighs 515 lbs (233.6 kg), a 35 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What SWZT Hydro-Drive's weight means for a trailer ›
  4. SWZT Hydro-Drive has a published top speed of 7 mph; SWZ Hydro-Drive has a published top speed of 7.4 mph, a 0.4 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  5. SWZT Hydro-Drive cuts from 1.5 in (38 mm) to 4.5 in (114 mm); SWZ Hydro-Drive cuts from 1.7 in (44 mm) to 4.5 in (114 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
calculated figures

Calculated by MowerFacts

  • SWZT Hydro-Drive works out to 2.0 acres/hour; SWZ Hydro-Drive works out to 2.2 acres/hour, a 0.1 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every push / walk-behind mower · more Scag
Side-by-side specifications: Scag SWZT Hydro-Drive vs Scag SWZ Hydro-Drive
Spec SWZT Hydro-Drive
Scag · Push / Walk-Behind
SWZ Hydro-Drive
Scag · Push / Walk-Behind
List price $6,499–$7,999$8,449–$11,329
Engine
Power Source gas gas
Engine Power 14 hp 14 hp
Engine Make Kawasaki® FS Series Kawasaki® FS Series
Deck
Cutting Width 36 in (914 mm) 36 in (914 mm)
Min Cut Height 1.5 in (38 mm) 1.7 in (44 mm)
Max Cut Height 4.5 in (114 mm) 4.5 in (114 mm)
Deck Construction Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles. Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
Drive
Ground Speed 7 mph 7.4 mph
Drive System Hydro-Gear ZT2800 Transaxle Dual Pump and Motor
Drive Tire Size 18″ x 6.5″-8″ (36″)18″ x 8.5″-8″ (48″, 52″ and 61″) 16″ x 6.5″-8″
Reverse Speed 3 mph 3 mph
Dimensions
Weight 550 lbs (249.5 kg) 515 lbs (233.6 kg)
Fuel Capacity 5.5 gal (20.8 L) 5.5 gal (20.8 L)
Width 48.5 in (1232 mm) —
Length 75.5 in (1918 mm) —
Height 44 in (1118 mm) —
Commercial / Pro
Seat Type n/a n/a

Where these models differ, explained

SWZT Hydro-Drive: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.

SWZ Hydro-Drive: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction