MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Snapper 360Z Zero Turn Mower 2691499 — residential: typical home lawns; 26-inch deck; gas powered
  • Scag V-Ride II — commercial: daily paid use and high acreage; 32-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. 360Z Zero Turn Mower 2691499 uses a Briggs & Stratton® EX Series™ engine; V-Ride II uses a Kawasaki® FX Series engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
  2. 360Z Zero Turn Mower 2691499 holds 3 gal (11.4 L) of fuel; V-Ride II holds 5 gal (18.9 L) of fuel, a 2 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  3. 360Z Zero Turn Mower 2691499 has a published top speed of 6 mph; V-Ride II has a published top speed of 8.5 mph, a 2.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  4. 360Z Zero Turn Mower 2691499 has a 26 in (660 mm) deck; V-Ride II has a 32 in (813 mm) deck, a 6 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
  5. 360Z Zero Turn Mower 2691499 has a 19 hp engine; V-Ride II has a 16 hp engine, a 3 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
1 more difference, calculated figures and what isn’t comparable

Other verified differences

  • 360Z Zero Turn Mower 2691499 has a 33 ci (540 cc) engine; V-Ride II has a 36.8 ci (603 cc) engine, a 3.8 ci difference.

Calculated by MowerFacts

  • 360Z Zero Turn Mower 2691499 works out to 1.3 acres/hour; V-Ride II works out to 2.2 acres/hour, a 0.9 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Weight: not published for 360Z Zero Turn Mower 2691499.
  • Blades: not published for V-Ride II.
  • Transmission: not published for V-Ride II.
  • Drive System: not published for 360Z Zero Turn Mower 2691499.
  • Discharge: not published for V-Ride II.
  • Start Type: not published for V-Ride II.
  • Price: 360Z Zero Turn Mower 2691499 is dealer quote only.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every zero-turn mower · more Snapper · more Scag
Side-by-side specifications: Snapper 360Z Zero Turn Mower 2691499 vs Scag V-Ride II
Spec 360Z Zero Turn Mower 2691499
Snapper · Zero-Turn
V-Ride II
Scag · Zero-Turn
List price dealer quote$9,999–$15,399
Engine
Power Source gas gas
Displacement 33 ci (540 cc) 36.8 ci (603 cc)
Engine Power 19 hp 16 hp
Engine Make Briggs & Stratton® EX Series™ Kawasaki® FX Series
Cylinders 1 —
Start Type Key —
Deck
Cutting Width 26 in (660 mm) 32 in (813 mm)
Blades 2 —
Min Cut Height 1.5 in (38 mm) 1.5 in (38 mm)
Max Cut Height 4.5 in (114 mm) 4.5 in (114 mm)
Deck Construction Fabricated Steel Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles.32″ model features dual-plate.
Spindle Type Aluminum —
Anti-Scalp Rollers No —
Discharge Side Discharge —
Cut Positions 7 —
Drive
Transmission Hydro-Gear® EZT® —
Ground Speed 6 mph 8.5 mph
Drive Tire Size — 20″ x 6.5″-10″ (32″)20″ x 8″-10″ (36″)24″ x 9.5″-12″ (48″ and 52″)24″ x 12″-12″ (61″)
Reverse Speed 3 mph 5 mph
Drive System — Dual Pump and Motor
Dimensions
Weight — 818 lbs (371 kg)
Fuel Capacity 3 gal (11.4 L) 5 gal (18.9 L)
Commercial / Pro
Frame Construction 12-Gauge Steel —
Seat Type 15" Mid-back, Adjustable Extra-large comfort cushion

360Z Zero Turn Mower 2691499: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — snapper.com.

V-Ride II: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction