Scag SFCII-30
Push / Walk-Behind mower · Model SFCII-30 · Commercial-duty · Gas
$2,999 Scag list price
Manufacturer list price only — it excludes tax, freight, dealer setup and any local discount, and dealers set the final price.
- Mows an acre in 101 min (71 at top speed) How long for your yard? ›
- How these are worked out ›
The Scag SFCII-30 is a commercial-grade gas walk-behind mower, built for daily professional use, with a 30-inch deck. It weighs 202 lb (91.6 kg).
At a glance
Compare similar mowers See how this mower compares with machines of a similar size and purpose.
Few close matches: the list also allows a wider deck range, other duty classes and discontinued models, each labelled.
Chosen by stated rules, not opinion: same class, a deck within 2 in of this one, the same kind of power and a compatible duty class, then the closest power, weight and price, with other makers preferred. Figures are the manufacturers’ published ones; nothing is estimated.
Engine
| Power Source | gas |
|---|---|
| Engine Power | 7 hp |
| Engine Make | Kohler® Command PRO® CV224 |
Deck
| Cutting Width | 30 in (762 mm) |
|---|---|
| Min Cut Height | 1.5 in (38 mm) |
| Max Cut Height | 5 in (127 mm) |
| Deck Construction | 14-gauge, stamped steel deck shell with 14-gauge spindle reinforcement plate. Side reinforcement plates offer extra protection against impacts. |
Drive
| Drive System | GT MV 702 Transmission |
|---|---|
| Ground Speed | 3.5 mph |
Dimensions
| Weight | 202 lbs (91.6 kg) |
|---|---|
| Fuel Capacity | 1 gal (3.8 L) |
Similar models
Other push / walk-behind mowers with comparable specs — including other brands — that buyers cross-shop with the SFCII-30.
Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.
See every mower with a Kohler Command Pro engine ›
See all Scag mowers and specs ›
Spot a wrong spec? Suggest a correction.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.
What the specs work out to
Figures MowerFacts computes from Scag’s own numbers — not published by the manufacturer.
Mowing time
- ¼ acre25 min 18 min
- ½ acre51 min 35 min
- 1 acre1 h 41 min 1 h 11 min
- 2 acres3 h 22 min 2 h 21 min
About 101 min per acre at 0.59 acres/hour, mowing at 2.4 mph. The second figure is at the published 3.5 mph top speed (0.85 acres/hour) — faster than anyone really mows. About 0.6 acres per tank.
Gate & trailer fit
- 32 in gateToo wide
- 36 in gateFits
- 48 in gateFits
Needs at least 36 in of clearance (estimated).
Power & run time
- Power per deck inch0.233 hp/in
- Run time per tank~1.0 h
Mowing times assume 0.59 acres/hour: deck width x 2.4 mph at 80% efficiency, which allows for overlap, turns and trimming. 2.4 mph is 70% of the 3.5 mph top speed Scag publishes - almost nobody mows flat out. The "at top speed" figure is the same sum at 3.5 mph, shown so you can see it.
Fit uses the deck width plus 6 in for the discharge chute, because Scag doesn't publish an overall width — measure before buying if a gate is tight.
Run time assumes a typical 1 gal/hour burn at working load; real consumption varies with engine, load and cut.
Scag SFCII-30 questions
What size deck is on the Scag SFCII-30?
The Scag SFCII-30 has a 30-inch (762 mm) cutting deck.
What engine is in the Scag SFCII-30?
The Scag SFCII-30 is powered by a Kohler® Command PRO® CV224, 7 hp. Horsepower is the manufacturer's own rating.
How much does the Scag SFCII-30 weigh?
The Scag SFCII-30 weighs 202 lb (91.6 kg) as specified by Scag.
How fast is the Scag SFCII-30?
Top ground speed is 3.5 mph. With its 30-inch deck that works out to about 0.85 acres per hour at 80% efficiency — allowing for overlap, turns and trimming.
How long does the Scag SFCII-30 take to mow an acre?
About 1 h 11 min per acre, from its 30-inch deck at 3.5 mph and 80% efficiency — roughly 0.85 acres an hour, so five acres is about 5 h 53 min. Rough or obstacle-heavy ground takes longer; this is deck width times ground speed, not a timed test.
How big is the fuel tank on the Scag SFCII-30?
The Scag SFCII-30 holds 1 gal (3.8 L) of fuel.
How much does the Scag SFCII-30 cost?
Scag's published list price is $2,999, checked 22 October 2026. That excludes tax, freight, dealer setup and any local discount — dealers set the final price.
What is the Scag SFCII-30 built for?
Commercial-duty push / walk-behind mower. Built for daily, paid commercial use.
Source: Scag (manufacturer) · archived copy