MowerFacts
HomeCommercialToroGrandStand 36 in. 15 hp 541cc › Archived source

Archived source page — Toro GrandStand® 36 in. (91 cm) 15 hp 541cc

Archived copy of https://www.toro.com/en/product/74534 as of June 6, 2026 — for reference only; visit the manufacturer for current specs.

This is a sanitized, script-free snapshot stored by MowerFacts for provenance. Content and trademarks belong to Toro (toro.com). MowerFacts is an independent reference site and is not affiliated with the manufacturer.

Visit the manufacturer page ›   ‹ Back to GrandStand 36 in. 15 hp 541cc specs

Specifications

Adjustable Discharge Baffle Standard
Blade Tip Speed 18,500 ft/min / 5,638 m/min
Blades 0.204 in. (0.5 cm) heat-treated steel
Box Dimensions 77.25 in. x 49 in. x 52 in. x 196.2 cm x 124.5 cm x 132.1 cm
CARB Compliant Not CARB Compliant
Carrier Frame 3 in. x 1.5 in. x 12 gauge (7.6 cm x 3.8 cm x 12 gauge)
Caster Tires 11 in. x 4 in. - 5 in. (28 cm x 10.2 cm - 12.7 cm) Flat-Free Semi-Pneumatic
Clutch Electromagnetic
Comfort Platform Foldable Operator Platform with Suspension
Controls Twin lever
Deck Design 7-gauge 36" (91 cm) TURBO FORCE® with bull-nose bumper
Deck Material 7 Gauge Steel
Deck Size 36 in / 91 cm
Discharge Chute Rubber
Drive System Pumps 10cc rev Wheel Motors 10 cir
Drive Tires 18 in. x 8.5 in. - 8 in. (46 cm x 22 cm - 20 cm)
Engine 15 hp* (11kW) Kawasaki® FS541V 603 cc
Engine Brand Kawasaki
Engine Displacement (cc) 603 cc
Engine Horsepower 15.0 hp
Forward Ground/Transport Speed Up to 8.0 mph / 12.8 kph
Front Bumper Reinforced Bull-Nose
Fuel Capacity 7.8 gal. / 29.5 L / 31.2 Qt.
Fuel Type Gasoline
Height of Cut 1.0 - 5.0 in. / 2.5 - 12.7 cm
Hour Meter Standard
Hydraulic Fluid Premium synthetic
Number of Blades 3
Product Type Stand-On Mowers
Product Use Commercial
Spindle Bearings Maintenance-free
Spindle Housing 9.375 in / 23.8 cm Diameter Cast Iron
Start Type Electric
Steering Controls Twin Lever
Weight 837 lbs / 379.7 kg

Disclaimer

*The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAEJ2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Archived June 6, 2026 from toro.com. Reproduced for reference and provenance only; see the normalized MowerFacts spec sheet for the comparison-ready data.