MowerFacts
HomeCommercialToroGrandStand HDM 32 in 18.5hp (603cc) › Archived source

Archived source page — Toro GrandStand® HDM 32 in (81.3 cm) 18.5hp (603cc)

Archived copy of https://www.toro.com/en/product/74532 as of June 6, 2026 — for reference only; visit the manufacturer for current specs.

This is a sanitized, script-free snapshot stored by MowerFacts for provenance. Content and trademarks belong to Toro (toro.com). MowerFacts is an independent reference site and is not affiliated with the manufacturer.

Visit the manufacturer page ›   ‹ Back to GrandStand HDM 32 in 18.5hp (603cc) specs

Specifications

Air Filter Dual Element with Reinforced Primary Filter
Blade Design 0.204 in. / 0.518 cm Thick Heat-treated Steel
Blade Tip Speed 18,500 ft/min / 5,638 m/min
Box Dimensions 45.5 in. x 70 in. x 52 in. / 115.6 cm x 117.8 cm x 132.1 cm
Brake System Lever Actuated Bar Brake (Park Brake)
CARB Compliant Not CARB Compliant
Carrier Frame Welded Heavy-Duty 1.5 in. x 3 in. Tube Steel
Caster Tires 9 in. x 4.5 in. - 5 in. (22.8 cm x 11.4 cm - 12.5 cm) Smooth Semi-Pneumatic
Clutch Electromagnetic
Cooling System Air Cooled
Deck Design Fabricated Weldment
Deck Material 7 Gauge High-Strength Steel
Deck Size 32 in / 81 cm
Discharge Chute Rubber
Drive System Rear Wheel Drive
Drive Tires 21 in. x 8.5 in. - 10 in. (53.3 cm x 21.6 cm x 25.4 cm) Turf Tires
Drive Type Rear-Wheel Drive
Engine 18.5 hp Kawasaki FS600V 603 cc
Engine Brand Kawasaki
Engine Displacement (cc) 603 cc
Engine Horsepower 18.5 hp
Forward Ground/Transport Speed Up to 7.5 mph / 12.0 kph
Forward Mowing Speed Up to 7.5 mph / 12.0 kph
Front Bumper Bull-Nose
Fuel Capacity 5 gal. / 18.9 L / 20 Qt.
Fuel Type Gasoline
Greasable Bearings Yes
Product Type Stand-On Mowers
Product Use Commercial
Start Type Electric
Steering Controls Twin Lever
Weight 775 lbs / 351.5 kg

Disclaimer

*The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAEJ2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.
**Ground coverage via wider cutting path and enhanced speed of 32" GrandStand Compact vs 21" Heavy Duty mower and will vary due to mowing conditions.

Archived June 6, 2026 from toro.com. Reproduced for reference and provenance only; see the normalized MowerFacts spec sheet for the comparison-ready data.