MowerFacts
Home › Australia › Compare

Compare Mowers

Prices are the recommended retail prices published by each manufacturer’s Australian site, in AUD, as read on the date shown on each model’s page; dealers set the final price.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Cox 400 Series 442 42 in — prosumer: larger home properties and light acreage; 42-inch deck; gas powered
  • Bad Boy Mowers 2026 Rambler — prosumer: larger home properties and light acreage; 42-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. 400 Series 442 42 in holds 32 L (8.5 gal) of fuel; 2026 Rambler holds 22.7 L (6 gal) of fuel, a 9.3 L difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  2. 400 Series 442 42 in has a published top speed of 7.5 mph; 2026 Rambler has a published top speed of 6 mph, a 1.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  3. 400 Series 442 42 in lists at A$9,999; 2026 Rambler lists at A$9,240, a A$759 difference. List price is the maker's own figure before tax, freight and dealer setup. Dealers set the final price.
  4. 400 Series 442 42 in weighs 277 kg (611 lbs); 2026 Rambler weighs 287 kg (633 lbs), a 10 kg difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What 400 Series 442 42 in's weight means for a trailer ›
  5. 400 Series 442 42 in cuts from 25 mm (1 in) to 102 mm (4 in); 2026 Rambler cuts from 38 mm (1.5 in) to 114 mm (4.5 in). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
calculated figures and what isn’t comparable

Calculated by MowerFacts

  • 400 Series 442 42 in works out to 1.02 ha/hour; 2026 Rambler works out to 0.82 ha/hour, a 0.20 ha/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Warranty: not published for 400 Series 442 42 in.
  • Engine Make: not published for 2026 Rambler.
  • Deck Construction: not published for 400 Series 442 42 in.
  • Discharge: not published for 400 Series 442 42 in.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every zero-turn mower sold in Australia · more Cox · more Bad Boy Mowers
Side-by-side specifications: Cox 400 Series 442 42 in vs Bad Boy Mowers 2026 Rambler
Spec 400 Series 442 42 in
Cox · Zero-Turn
2026 Rambler
Bad Boy Mowers · Zero-Turn
RRP (AUD) A$9,999A$9,240
Engine
Power Source gas gas
Displacement 44.3 ci (726 cc) 44.3 ci (726 cc)
Engine Power 21.5 hp 21.5 hp
Engine Make Kawasaki —
Engine Model Kawasaki FR651V —
Deck
Cutting Width 42 in (1067 mm) 42 in (1067 mm)
Min Cut Height 1 in (25 mm) 1.5 in (38 mm)
Max Cut Height 4 in (102 mm) 4.5 in (114 mm)
Deck Construction — 7 Gauge/4.55mm
Spindle Type Electromagnetic Clutch —
Discharge — Side Discharge
Drive
Transmission Hydro-2800 with charge pumps - Serviceable Dual Hydro-Gear ZT 2200 Series Integrated Drive Systems
Ground Speed 7.5 mph 6 mph
Drive Tire Size 13x500x6 (F), 20x8-8 (R 42”) 18x8.5-8 Reaper
Dimensions
Weight 611 lbs (277 kg) 633 lbs (287 kg)
Fuel Capacity 8.5 gal (32 L) 6 gal (22.7 L)
Length 80.7 in (2050 mm) 76 in (1930 mm)
Width 43.3 in (1100 mm) —
Height — 42 in (1067 mm)
Commercial / Pro
Frame Construction Fabricated Steel: Chassis 4.55mm —
Seat Type Premium Highback Seat with Armrests with Fingertip Adjustment —
General
Warranty — 2 yr

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction