MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Bad Boy Mowers Renegade Gas — commercial: daily paid use and high acreage; 61-inch deck; gas powered
  • Scag V-Ride XL — commercial: daily paid use and high acreage; 52-inch deck; gas powered
What’s different? The 4 differences that matter most, from the published figures.
  1. Renegade Gas weighs 1,628 lbs (738.5 kg); V-Ride XL weighs 1,179 lbs (534.8 kg), a 449 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Renegade Gas's weight means for a trailer ›
  2. Renegade Gas has a 61 in (1,549 mm) deck; V-Ride XL has a 52 in (1,321 mm) deck, a 9 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
  3. Renegade Gas has a published top speed of 13 mph; V-Ride XL has a published top speed of 11.6 mph, a 1.4 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  4. Renegade Gas holds 13 gal (49.2 L) of fuel; V-Ride XL holds 12 gal (45.4 L) of fuel, a 1 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
calculated figures and what isn’t comparable

Calculated by MowerFacts

  • Renegade Gas works out to 6.4 acres/hour; V-Ride XL works out to 4.9 acres/hour, a 1.5 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Transmission: not published for V-Ride XL.
  • Deck Material: not published for V-Ride XL.
  • Deck Construction: not published for Renegade Gas.
  • Drive System: not published for Renegade Gas.
  • Price: Renegade Gas is dealer quote only.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every zero-turn mower · more Bad Boy Mowers · more Scag
Side-by-side specifications: Bad Boy Mowers Renegade Gas vs Scag V-Ride XL
Spec Renegade Gas
Bad Boy Mowers · Zero-Turn
V-Ride XL
Scag · Zero-Turn
List price dealer quote$15,249–$17,399
Engine
Power Source gas gas
Displacement 61 ci (999 cc) 61 ci (999 cc)
Engine Power 38.5 hp 38.5 hp
Engine Make Kohler Kawasaki® FX Series EFI– electronic fuel injection
Deck
Cutting Width 61 in (1549 mm) 52 in (1321 mm)
Min Cut Height 2 in (51 mm) 2 in (51 mm)
Max Cut Height 6 in (152 mm) 6 in (152 mm)
Deck Material 1/4" or 3-Gauge Thick Solid Steel —
Deck Construction — Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles.
Deck Gauge 3 —
Drive
Transmission Hydro-Gear® 16cc Pump; Parker® 18ci Wheel Motors —
Ground Speed 13 mph 11.6 mph
Drive Tire Size — 24″ x 9.5″-12″ (52″)24″ x 12″-12″ (61″ and 72″)
Drive System — Dual Pump & Motor
Reverse Speed — 5 mph
Dimensions
Weight 1628 lbs (738.5 kg) 1179 lbs (534.8 kg)
Fuel Capacity 13 gal (49.2 L) 12 gal (45.4 L)

Renegade Gas: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — badboycountry.com.

V-Ride XL: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction