MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Cub Cadet XT1 LT46 — prosumer: larger home properties and light acreage; 46-inch deck; gas powered
  • Cub Cadet CC30 Riding Lawn Mower — residential: typical home lawns; 30-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. XT1 LT46 has a 22 hp engine; CC30 Riding Lawn Mower has a 10.5 hp engine, a 11.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
  2. XT1 LT46 uses a Kohler® engine; CC30 Riding Lawn Mower uses a Briggs & Stratton® engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
  3. XT1 LT46 has a 46 in (1,168 mm) deck; CC30 Riding Lawn Mower has a 30 in (762 mm) deck, a 16 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
  4. XT1 LT46 holds 3 gal (11.4 L) of fuel; CC30 Riding Lawn Mower holds 1.3 gal (4.9 L) of fuel, a 1.7 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  5. XT1 LT46 has a 45.6 ci (747 cc) engine; CC30 Riding Lawn Mower has a 21 ci (344 cc) engine, a 24.6 ci difference. Displacement is the engine's size, not its output. A larger engine is not necessarily a more powerful one.
7 more differences, calculated figures

Other verified differences

  • XT1 LT46 has a Tuff Torq® TL-200 transmission; CC30 Riding Lawn Mower has a Cub Cadet transmission.
  • XT1 LT46 has a 12-gauge steel deck; CC30 Riding Lawn Mower has a 14-gauge steel deck.
  • XT1 LT46 has Hydrostatic drive; CC30 Riding Lawn Mower has CVT drive.
  • XT1 LT46 lists at $2,599; CC30 Riding Lawn Mower lists at $2,099, a $500 difference.
  • XT1 LT46 has a published top speed of 5.5 mph; CC30 Riding Lawn Mower has a published top speed of 4.2 mph, a 1.2 mph difference.
  • XT1 LT46 has 2 blades; CC30 Riding Lawn Mower has 1 blade.
  • XT1 LT46 cuts from 1 in (25 mm) to 4 in (102 mm); CC30 Riding Lawn Mower cuts from 1.5 in (38 mm) to 4 in (102 mm).

Calculated by MowerFacts

  • XT1 LT46 works out to 2.0 acres/hour; CC30 Riding Lawn Mower works out to 1.0 acres/hour, a 1.0 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every riding (lawn tractor) mower · more Cub Cadet
Side-by-side specifications: Cub Cadet XT1 LT46 vs Cub Cadet CC30 Riding Lawn Mower
Spec XT1 LT46
Cub Cadet · Riding (Lawn Tractor)
CC30 Riding Lawn Mower
Cub Cadet · Riding (Lawn Tractor)
List price $2,599$2,099
Engine
Power Source gas gas
Displacement 45.6 ci (747 cc) 21 ci (344 cc)
Engine Power 22 hp 10.5 hp
Engine Make Kohler® Briggs & Stratton®
Cylinders 2 1
Engine Model 7000 Series Powerbuilt
Start Type Ignition Key Ignition Key
Deck
Cutting Width 46 in (1168 mm) 30 in (762 mm)
Blades 2 1
Min Cut Height 1 in (25 mm) 1.5 in (38 mm)
Max Cut Height 4 in (102 mm) 4 in (102 mm)
Deck Material 12-gauge steel 14-gauge steel
Deck Construction Stamped Stamped
Deck Gauge 12 14
Cut Positions 12 5
Drive
Transmission Tuff Torq® TL-200 Cub Cadet
Ground Speed 5.5 mph 4.2 mph
Reverse Speed 3 mph 2 mph
Drive System Hydrostatic CVT
Dimensions
Fuel Capacity 3 gal (11.4 L) 1.3 gal (4.9 L)
General
Warranty 3 yr 3 yr

XT1 LT46: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — cubcadet.com.

CC30 Riding Lawn Mower: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — cubcadet.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction