Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Dixie Chopper XCaliber 74 in (3574KW) — commercial: daily paid use and high acreage; 74-inch deck; gas powered
- Gravely PRO-TURN 472X KAWASAKI FX1000 — commercial: daily paid use and high acreage; 72-inch deck; gas powered
What’s different? The 1 difference that matter most, from the published figures.
- XCaliber 74 in (3574KW) has a 74 in (1,880 mm) deck; PRO-TURN 472X KAWASAKI FX1000 has a 72 in (1,829 mm) deck, a 2 in difference. Deck width sets how much grass each pass covers. Mowing time also depends on ground speed, turns and obstacles, so a wider deck alone does not fix the job's length. Time both decks on your own lawn ›
what isn’t comparable
Not comparable
- Fuel Capacity: not published for PRO-TURN 472X KAWASAKI FX1000.
- Deck Material: not published for XCaliber 74 in (3574KW).
- Deck Construction: not published for XCaliber 74 in (3574KW).
- Discharge: not published for XCaliber 74 in (3574KW).
- Price: XCaliber 74 in (3574KW) is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | XCaliber 74 in (3574KW) Dixie Chopper · Zero-Turn |
PRO-TURN 472X KAWASAKI FX1000 Gravely · Zero-Turn |
|---|---|---|
| List price | dealer quote | $16,599 |
| Engine | ||
| Power Source | gas | gas |
| Engine Power | 35 hp | 35 hp |
| Engine Make | Kawasaki® FX | Kawasaki® |
| Engine Model | — | FX1000 |
| Deck | ||
| Cutting Width | 74 in (1880 mm) | 72 in (1829 mm) |
| Deck Material | — | 7 ga |
| Deck Construction | — | Fabricated X-Factor® 3 |
| Deck Gauge | — | 7 |
| Discharge | — | Side |
| Dimensions | ||
| Fuel Capacity | 12 gal (45.4 L) | — |
Where these models differ, explained
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.