Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Exmark Exmark Navigator Mower — commercial: daily paid use and high acreage; 48-inch deck
- Wright Stander X 48 FX730E — commercial: daily paid use and high acreage; 48-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Exmark Navigator Mower uses a Kohler CH749 engine; Stander X 48 FX730E uses a Kawasaki engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- Exmark Navigator Mower has a published top speed of 7 mph; Stander X 48 FX730E has a published top speed of 9.5 mph, a 2.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- Exmark Navigator Mower weighs 1,191 lbs (540.2 kg); Stander X 48 FX730E weighs 900 lbs (408.2 kg), a 291 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Exmark Navigator Mower's weight means for a trailer ›
- Exmark Navigator Mower cuts from 1 in (25 mm) to 4 in (102 mm); Stander X 48 FX730E cuts from 1.5 in (38 mm) to 5.5 in (140 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
- Exmark Navigator Mower has a 26.5 hp engine; Stander X 48 FX730E has a 23.5 hp engine, a 3 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
2 more differences, calculated figures and what isn’t comparable
Other verified differences
- Exmark Navigator Mower holds 7.5 gal (28.4 L) of fuel; Stander X 48 FX730E holds 8 gal (30.3 L) of fuel, a 0.5 gal difference.
- Exmark Navigator Mower has a 45.6 ci (747 cc) engine; Stander X 48 FX730E has a 44.3 ci (726 cc) engine, a 1.3 ci difference.
Calculated by MowerFacts
- Exmark Navigator Mower works out to 2.7 acres/hour; Stander X 48 FX730E works out to 3.7 acres/hour, a 1.0 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Bagger Capacity: not published for Stander X 48 FX730E.
- Blades: not published for Exmark Navigator Mower.
- Transmission: not published for Exmark Navigator Mower.
- Fuel Type: not published for Exmark Navigator Mower.
- Deck Material: not published for Exmark Navigator Mower.
- Start Type: not published for Exmark Navigator Mower.
- Price: Stander X 48 FX730E is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Exmark Navigator Mower Exmark · Commercial |
Stander X 48 FX730E Wright · Commercial |
|---|---|---|
| List price | $20,899 | dealer quote |
| Engine | ||
| Power Source | — | gas |
| Engine Make | Kohler CH749 | Kawasaki |
| Displacement | 45.6 ci (747 cc) | 44.3 ci (726 cc) |
| Engine Power | 26.5 hp | 23.5 hp |
| Engine Model | ECH749 | FX730E |
| Fuel Type | — | Gasoline |
| Start Type | — | Electric |
| Deck | ||
| Cutting Width | 48 in (1219 mm) | 48 in (1219 mm) |
| Blades | — | 3 |
| Deck Material | — | 7 Gauge |
| Deck Construction | 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard | Floating-side discharge |
| Deck Gauge | 7 | 7 |
| Min Cut Height | 1 in (25 mm) | 1.5 in (38 mm) |
| Blade Tip Speed | 18500 ft/min (5638.8 m/min) | — |
| Max Cut Height | 4 in (102 mm) | 5.5 in (140 mm) |
| Drive | ||
| Transmission | — | Hydro |
| Ground Speed | 7 mph | 9.5 mph |
| Reverse Speed | — | 5.5 mph |
| Dimensions | ||
| Weight | 1191 lbs (540.2 kg) | 900 lbs (408.2 kg) |
| Fuel Capacity | 7.5 gal (28.4 L) | 8 gal (30.3 L) |
| Length | 94.5 in (2400 mm) | 65 in (1651 mm) |
| Width | 49.2 in (1250 mm) | 49 in (1245 mm) |
| Height | 51.2 in (1300 mm) | — |
| General | ||
| Bagger Capacity | 8.2 bu (287.7 L) | — |
Where these models differ, explained
Exmark Navigator Mower: Specs verified against the retailer listing on Jun 6, 2026 — allmachines.com.
Stander X 48 FX730E: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.