Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Exmark Vertex E-Series (32 in) — commercial: daily paid use and high acreage; 32-inch deck; gas powered
- Wright Stander B 32 FX600E — commercial: daily paid use and high acreage; 32-inch deck; gas powered
What’s different? The 3 differences that matter most, from the published figures.
- Vertex E-Series (32 in) cuts from 1 in (25 mm) to 4.5 in (114 mm); Stander B 32 FX600E cuts from 2 in (51 mm) to 5 in (127 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
- Vertex E-Series (32 in) has a published top speed of 7.5 mph; Stander B 32 FX600E has a published top speed of 7 mph, a 0.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- Vertex E-Series (32 in) has a 18.5 hp engine; Stander B 32 FX600E has a 19 hp engine, a 0.5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
calculated figures and what isn’t comparable
Calculated by MowerFacts
- Vertex E-Series (32 in) works out to 1.9 acres/hour; Stander B 32 FX600E works out to 1.8 acres/hour, a 0.1 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Blades: not published for Vertex E-Series (32 in).
- Transmission: not published for Vertex E-Series (32 in).
- Fuel Type: not published for Vertex E-Series (32 in).
- Deck Material: not published for Vertex E-Series (32 in).
- Deck Construction: not published for Vertex E-Series (32 in).
- Start Type: not published for Vertex E-Series (32 in).
- Price: Stander B 32 FX600E is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Vertex E-Series (32 in) Exmark · Commercial |
Stander B 32 FX600E Wright · Commercial |
|---|---|---|
| List price | $9,799 | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Kawasaki FS600V | Kawasaki |
| Displacement | 36.8 ci (603 cc) | 36.8 ci (603 cc) |
| Engine Power | 18.5 hp | 19 hp |
| Engine Model | — | FX600E |
| Fuel Type | — | Gasoline |
| Start Type | — | Electric |
| Deck | ||
| Cutting Width | 32 in (813 mm) | 32 in (813 mm) |
| Blades | — | 2 |
| Deck Material | — | 7 Gauge |
| Deck Construction | — | Floating-side discharge |
| Deck Gauge | — | 7 |
| Min Cut Height | 1 in (25 mm) | 2 in (51 mm) |
| Max Cut Height | 4.5 in (114 mm) | 5 in (127 mm) |
| Drive | ||
| Transmission | — | Hydro |
| Ground Speed | 7.5 mph | 7 mph |
| Reverse Speed | — | 3 mph |
| Dimensions | ||
| Weight | 702 lbs (318.4 kg) | 703 lbs (318.9 kg) |
| Fuel Capacity | 5 gal (18.9 L) | 5 gal (18.9 L) |
| Length | — | 66.5 in (1689 mm) |
| Width | — | 46 in (1168 mm) |
Where these models differ, explained
Vertex E-Series (32 in): Specs verified against the retailer listing on Jun 6, 2026 — russopower.com.
Stander B 32 FX600E: Specs verified against the retailer listing on Jun 7, 2026 — powerequipmentplus1.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.