Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Hustler Turf HyperDrive — commercial: daily paid use and high acreage; 72-inch deck; gas powered
- Wright ZXT 72 FXT00 — commercial: daily paid use and high acreage; 72-inch deck; gas powered
What’s different? The 4 differences that matter most, from the published figures.
- HyperDrive has a published top speed of 16 mph; ZXT 72 FXT00 has a published top speed of 13 mph, a 3 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- HyperDrive holds 12 gal (45.4 L) of fuel; ZXT 72 FXT00 holds 15.5 gal (58.7 L) of fuel, a 3.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- HyperDrive weighs 1,686 lbs (764.8 kg); ZXT 72 FXT00 weighs 1,551 lbs (703.5 kg), a 135 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What HyperDrive's weight means for a trailer ›
- HyperDrive cuts from 1 in (25 mm) to 5.5 in (140 mm); ZXT 72 FXT00 cuts from 1.5 in (38 mm) to 6 in (152 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
calculated figures and what isn’t comparable
Calculated by MowerFacts
- HyperDrive works out to 9.3 acres/hour; ZXT 72 FXT00 works out to 7.6 acres/hour, a 1.7 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Warranty: not published for ZXT 72 FXT00.
- Blades: not published for HyperDrive.
- Fuel Type: not published for HyperDrive.
- Deck Material: not published for HyperDrive.
- Deck Construction: not published for HyperDrive.
- Start Type: not published for HyperDrive.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | HyperDrive Hustler Turf · Commercial |
ZXT 72 FXT00 Wright · Commercial |
|---|---|---|
| List price | dealer quote | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Vanguard Big Block EFI Oil Guard & Kawasaki FX1000, FX1000 EFI | Kawasaki |
| Displacement | 60.6 ci (993 cc) | 61 ci (999 cc) |
| Engine Power | 38.5 hp | 38.5 hp |
| Engine Model | — | FXT00 |
| Fuel Type | — | Gasoline |
| Start Type | — | Electric |
| Deck | ||
| Cutting Width | 72 in (1829 mm) | 72 in (1829 mm) |
| Blades | — | 3 |
| Deck Material | — | 7 Gauge |
| Deck Construction | — | Floating-side discharge |
| Deck Gauge | — | 7 |
| Min Cut Height | 1 in (25 mm) | 1.5 in (38 mm) |
| Max Cut Height | 5.5 in (140 mm) | 6 in (152 mm) |
| Drive | ||
| Transmission | Danfoss DDC-20 Transmission w/ Parker TG wheel motors | Hydro |
| Ground Speed | 16 mph | 13 mph |
| Drive Type | Dual Hydrostatic | — |
| Reverse Speed | — | 7 mph |
| Dimensions | ||
| Weight | 1686 lbs (764.8 kg) | 1551 lbs (703.5 kg) |
| Fuel Capacity | 12 gal (45.4 L) | 15.5 gal (58.7 L) |
| Length | — | 84.5 in (2146 mm) |
| General | ||
| Warranty | 5 yr | — |
Where these models differ, explained
HyperDrive: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — hustlerturf.com.
ZXT 72 FXT00: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.