Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Hustler Turf Surfer Pro — commercial: daily paid use and high acreage; 48-inch deck; gas powered
- Wright Velke Hydrostatic Comfort Grip 48 FX600E — commercial: daily paid use and high acreage; 48-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Surfer Pro holds 2 gal (7.6 L) of fuel; Velke Hydrostatic Comfort Grip 48 FX600E holds 5.5 gal (20.8 L) of fuel, a 3.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- Surfer Pro weighs 490 lbs (222.3 kg); Velke Hydrostatic Comfort Grip 48 FX600E weighs 690 lbs (313 kg), a 200 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Surfer Pro's weight means for a trailer ›
- Surfer Pro has a 15 hp engine; Velke Hydrostatic Comfort Grip 48 FX600E has a 19 hp engine, a 4 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
- Surfer Pro has a published top speed of 6 mph; Velke Hydrostatic Comfort Grip 48 FX600E has a published top speed of 6.5 mph, a 0.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- Surfer Pro cuts from 2 in (51 mm) to 4.8 in (121 mm); Velke Hydrostatic Comfort Grip 48 FX600E cuts from 1.5 in (38 mm) to 4.3 in (108 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
calculated figures and what isn’t comparable
Calculated by MowerFacts
- Surfer Pro works out to 2.3 acres/hour; Velke Hydrostatic Comfort Grip 48 FX600E works out to 2.5 acres/hour, a 0.2 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Warranty: not published for Velke Hydrostatic Comfort Grip 48 FX600E.
- Blades: not published for Surfer Pro.
- Fuel Type: not published for Surfer Pro.
- Deck Material: not published for Surfer Pro.
- Deck Construction: not published for Surfer Pro.
- Start Type: not published for Surfer Pro.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Surfer Pro Hustler Turf · Commercial |
Velke Hydrostatic Comfort Grip 48 FX600E Wright · Commercial |
|---|---|---|
| List price | dealer quote | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Kawasaki FS541 | Kawasaki |
| Displacement | 36.8 ci (603 cc) | 36.8 ci (603 cc) |
| Engine Power | 15 hp | 19 hp |
| Engine Model | — | FX600E |
| Fuel Type | — | Gasoline |
| Start Type | — | Electric |
| Deck | ||
| Cutting Width | 48 in (1219 mm) | 48 in (1219 mm) |
| Blades | — | 3 |
| Deck Material | — | 7 Gauge |
| Deck Construction | — | Floating-side discharge |
| Deck Gauge | — | 7 |
| Min Cut Height | 2 in (51 mm) | 1.5 in (38 mm) |
| Max Cut Height | 4.8 in (121 mm) | 4.3 in (108 mm) |
| Drive | ||
| Transmission | Hydro-Gear ZT-1800® | Hydro |
| Ground Speed | 6 mph | 6.5 mph |
| Drive Type | Dual Hydrostatic | — |
| Reverse Speed | — | 2.5 mph |
| Dimensions | ||
| Weight | 490 lbs (222.3 kg) | 690 lbs (313 kg) |
| Fuel Capacity | 2 gal (7.6 L) | 5.5 gal (20.8 L) |
| Length | — | 74 in (1880 mm) |
| General | ||
| Warranty | 2 yr | — |
Where these models differ, explained
Surfer Pro: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — hustlerturf.com.
Velke Hydrostatic Comfort Grip 48 FX600E: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.