Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Scag RC Low-Profile Mower — commercial: daily paid use and high acreage; 52-inch deck; gas powered
- Kubota SZ26NC-52-2 — commercial: daily paid use and high acreage; 52-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- RC Low-Profile Mower cuts from 3.5 in (89 mm) to 11.5 in (292 mm); SZ26NC-52-2 cuts from 1.5 in (38 mm) to 4.5 in (114 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
- RC Low-Profile Mower has a published top speed of 3 mph; SZ26NC-52-2 has a published top speed of 11 mph, a 8 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- RC Low-Profile Mower weighs 2,400 lbs (1,088.6 kg); SZ26NC-52-2 weighs 997 lbs (452.2 kg), a 1,403 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What RC Low-Profile Mower's weight means for a trailer ›
- RC Low-Profile Mower uses a Briggs & Stratton® CXi Series™ engine; SZ26NC-52-2 uses a Kawasaki FT730VEFI engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- RC Low-Profile Mower has Electric Drive (No PTO) drive; SZ26NC-52-2 has Belt drive.
1 more difference, calculated figures and what isn’t comparable
Other verified differences
- RC Low-Profile Mower has a 27 hp engine; SZ26NC-52-2 has a 26 hp engine, a 1 hp difference.
Calculated by MowerFacts
- RC Low-Profile Mower works out to 1.3 acres/hour; SZ26NC-52-2 works out to 4.6 acres/hour, a 3.4 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Displacement: not published for RC Low-Profile Mower.
- Fuel Capacity: not published for RC Low-Profile Mower.
- Transmission: not published for RC Low-Profile Mower.
- Fuel Type: not published for RC Low-Profile Mower.
- Price: SZ26NC-52-2 is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | RC Low-Profile Mower Scag · Commercial |
SZ26NC-52-2 Kubota · Commercial |
|---|---|---|
| List price | $57,900 | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Briggs & Stratton® CXi Series™ | Kawasaki FT730VEFI |
| Displacement | — | 44.3 ci (726 cc) |
| Engine Power | 27 hp | 26 hp |
| Fuel Type | — | Gasoline |
| Deck | ||
| Cutting Width | 52 in (1321 mm) | 52 in (1321 mm) |
| Min Cut Height | 3.5 in (89 mm) | 1.5 in (38 mm) |
| Max Cut Height | 11.5 in (292 mm) | 4.5 in (114 mm) |
| Drive | ||
| Transmission | — | Hydro-Gear ZT-3600 |
| Ground Speed | 3 mph | 11 mph |
| Drive System | Electric Drive (No PTO) | Belt |
| Dimensions | ||
| Weight | 2400 lbs (1088.6 kg) | 997 lbs (452.2 kg) |
| Fuel Capacity | — | 6.5 gal (24.6 L) |
| Length | 75.4 in (1915 mm) | — |
| Width | 70 in (1778 mm) | — |
| Height | 32.5 in (826 mm) | — |
Where these models differ, explained
RC Low-Profile Mower: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.
SZ26NC-52-2: Specs verified against the retailer listing on Jun 6, 2026 — kubotausa.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.