Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Scag SFCII-30 — commercial: daily paid use and high acreage; 30-inch deck; gas powered
- Scag SFC-30 — commercial: daily paid use and high acreage; 30-inch deck; gas powered
What’s different? The 2 differences that matter most, from the published figures.
- SFCII-30 has a published top speed of 3.5 mph; SFC-30 has a published top speed of 4 mph, a 0.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- SFCII-30 weighs 202 lbs (91.6 kg); SFC-30 weighs 220 lbs (99.8 kg), a 18 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What SFCII-30's weight means for a trailer ›
calculated figures and what isn’t comparable
Calculated by MowerFacts
- SFCII-30 works out to 0.8 acres/hour; SFC-30 works out to 1.0 acres/hour, a 0.1 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Displacement: not published for SFCII-30.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | SFCII-30 Scag · Push / Walk-Behind |
SFC-30 Scag · Push / Walk-Behind |
|---|---|---|
| List price | $2,999 | $2,999 |
| Engine | ||
| Power Source | gas | gas |
| Displacement | — | 13.7 ci (224 cc) |
| Engine Power | 7 hp | 7 hp |
| Engine Make | Kohler® Command PRO® CV224 | Kohler® Command PRO® CV224 |
| Deck | ||
| Cutting Width | 30 in (762 mm) | 30 in (762 mm) |
| Min Cut Height | 1.5 in (38 mm) | 1.5 in (38 mm) |
| Max Cut Height | 5 in (127 mm) | 5 in (127 mm) |
| Deck Construction | 14-gauge, stamped steel deck shell with 14-gauge spindle reinforcement plate. Side reinforcement plates offer extra protection against impacts. | 14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts. |
| Drive | ||
| Ground Speed | 3.5 mph | 4 mph |
| Drive System | GT MV 702 Transmission | GT MV 702 Transmission |
| Dimensions | ||
| Weight | 202 lbs (91.6 kg) | 220 lbs (99.8 kg) |
| Fuel Capacity | 1 gal (3.8 L) | 1 gal (3.8 L) |
SFCII-30: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.
SFC-30: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — scag.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.