Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Wright Stander ZK 52 61G8 — commercial: daily paid use and high acreage; 52-inch deck; gas powered
- Exmark Vertex X-Series (52 in) — commercial: daily paid use and high acreage; 52-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- Stander ZK 52 61G8 uses a Briggs & Stratton engine; Vertex X-Series (52 in) uses a Kawasaki FX1000V engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
- Stander ZK 52 61G8 has a 40 hp engine; Vertex X-Series (52 in) has a 35 hp engine, a 5 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
- Stander ZK 52 61G8 weighs 1,130 lbs (512.6 kg); Vertex X-Series (52 in) weighs 1,250 lbs (567 kg), a 120 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What Stander ZK 52 61G8's weight means for a trailer ›
- Stander ZK 52 61G8 cuts from 1.5 in (38 mm) to 5.5 in (140 mm); Vertex X-Series (52 in) cuts from 1.5 in (38 mm) to 5 in (127 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
- Stander ZK 52 61G8 holds 15.5 gal (58.7 L) of fuel; Vertex X-Series (52 in) holds 14 gal (53 L) of fuel, a 1.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
1 more difference, what isn’t comparable
Other verified differences
- Stander ZK 52 61G8 has a published top speed of 12.5 mph; Vertex X-Series (52 in) has a published top speed of 12 mph, a 0.5 mph difference.
Not comparable
- Blades: not published for Vertex X-Series (52 in).
- Transmission: not published for Vertex X-Series (52 in).
- Fuel Type: not published for Vertex X-Series (52 in).
- Deck Material: not published for Vertex X-Series (52 in).
- Deck Construction: not published for Vertex X-Series (52 in).
- Start Type: not published for Vertex X-Series (52 in).
- Price: Stander ZK 52 61G8 is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | Stander ZK 52 61G8 Wright · Commercial |
Vertex X-Series (52 in) Exmark · Commercial |
|---|---|---|
| List price | dealer quote | $15,099 |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Briggs & Stratton | Kawasaki FX1000V |
| Displacement | 60.6 ci (993 cc) | 61 ci (999 cc) |
| Engine Power | 40 hp | 35 hp |
| Engine Model | 61G8 | — |
| Fuel Type | Gasoline | — |
| Start Type | Electric | — |
| Deck | ||
| Cutting Width | 52 in (1321 mm) | 52 in (1321 mm) |
| Blades | 3 | — |
| Deck Material | 7 Gauge | — |
| Deck Construction | Floating-side discharge | — |
| Deck Gauge | 7 | — |
| Min Cut Height | 1.5 in (38 mm) | 1.5 in (38 mm) |
| Max Cut Height | 5.5 in (140 mm) | 5 in (127 mm) |
| Drive | ||
| Transmission | Hydro | — |
| Ground Speed | 12.5 mph | 12 mph |
| Reverse Speed | 7 mph | — |
| Dimensions | ||
| Weight | 1130 lbs (512.6 kg) | 1250 lbs (567 kg) |
| Fuel Capacity | 15.5 gal (58.7 L) | 14 gal (53 L) |
| Length | 68 in (1727 mm) | — |
Where these models differ, explained
Stander ZK 52 61G8: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.
Vertex X-Series (52 in): Specs verified against the manufacturer spec sheet on Jun 6, 2026 — exmark.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.