MowerFacts
Home › Compare

Compare Mowers

List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.

A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.

Best suited for

What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.

  • Wright ZTS 52 FT730V — commercial: daily paid use and high acreage; 52-inch deck; gas powered
  • Exmark Vertex S-Series (52 in EFI) — commercial: daily paid use and high acreage; 52-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
  1. ZTS 52 FT730V uses a Kawasaki engine; Vertex S-Series (52 in EFI) uses a Kohler ECV740 engine. The engine maker builds the engine; the mower maker chooses the model, rating and fit, so the badge alone does not settle output or longevity.
  2. ZTS 52 FT730V weighs 1,160 lbs (526.2 kg); Vertex S-Series (52 in EFI) weighs 987 lbs (447.7 kg), a 173 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What ZTS 52 FT730V's weight means for a trailer ›
  3. ZTS 52 FT730V has a published top speed of 10 mph; Vertex S-Series (52 in EFI) has a published top speed of 8.5 mph, a 1.5 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
  4. ZTS 52 FT730V holds 7.5 gal (28.4 L) of fuel; Vertex S-Series (52 in EFI) holds 8 gal (30.3 L) of fuel, a 0.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
  5. ZTS 52 FT730V has a 24 hp engine; Vertex S-Series (52 in EFI) has a 25 hp engine, a 1 hp difference. Published horsepower is the maker's rating at a stated engine speed. It is a different measure from displacement, and two engines of equal rating can pull differently.
1 more difference, calculated figures and what isn’t comparable

Other verified differences

  • ZTS 52 FT730V has a 44.3 ci (726 cc) engine; Vertex S-Series (52 in EFI) has a 45.6 ci (747 cc) engine, a 1.3 ci difference.

Calculated by MowerFacts

  • ZTS 52 FT730V works out to 4.2 acres/hour; Vertex S-Series (52 in EFI) works out to 3.6 acres/hour, a 0.6 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.

Not comparable

  • Blades: not published for Vertex S-Series (52 in EFI).
  • Transmission: not published for Vertex S-Series (52 in EFI).
  • Fuel Type: not published for Vertex S-Series (52 in EFI).
  • Deck Material: not published for Vertex S-Series (52 in EFI).
  • Deck Construction: not published for Vertex S-Series (52 in EFI).
  • Start Type: not published for Vertex S-Series (52 in EFI).
  • Price: ZTS 52 FT730V is dealer quote only.

Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.

Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.

Add another (2 more fit): every commercial mower · more Wright · more Exmark
Side-by-side specifications: Wright ZTS 52 FT730V vs Exmark Vertex S-Series (52 in EFI)
Spec ZTS 52 FT730V
Wright · Commercial
Vertex S-Series (52 in EFI)
Exmark · Commercial
List price dealer quote$13,999
Engine
Power Source gas gas
Engine Make Kawasaki Kohler ECV740
Displacement 44.3 ci (726 cc) 45.6 ci (747 cc)
Engine Power 24 hp 25 hp
Engine Model FT730V —
Fuel Type Gasoline —
Start Type Electric —
Deck
Cutting Width 52 in (1321 mm) 52 in (1321 mm)
Blades 3 —
Deck Material 7 Gauge —
Deck Construction Floating-side discharge —
Deck Gauge 7 —
Min Cut Height 1.5 in (38 mm) 1.5 in (38 mm)
Max Cut Height 5 in (127 mm) 5 in (127 mm)
Drive
Transmission Hydro —
Ground Speed 10 mph 8.5 mph
Reverse Speed 4.5 mph —
Dimensions
Weight 1160 lbs (526.2 kg) 987 lbs (447.7 kg)
Fuel Capacity 7.5 gal (28.4 L) 8 gal (30.3 L)
Length 84 in (2134 mm) —

ZTS 52 FT730V: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — kawasakienginesusa.com.

Vertex S-Series (52 in EFI): Specs verified against the retailer listing on Jun 6, 2026 — howardbrothers.com.

Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.

Suggest a correction