Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Wright ZTS 61 FT730V — commercial: daily paid use and high acreage; 61-inch deck; gas powered
- Altoz XE 610 SS — commercial: daily paid use and high acreage; 61-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- ZTS 61 FT730V has a 7 Gauge deck; XE 610 SS has a Fabricated Steel deck.
- ZTS 61 FT730V weighs 1,210 lbs (548.9 kg); XE 610 SS weighs 970 lbs (440 kg), a 240 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What ZTS 61 FT730V's weight means for a trailer ›
- ZTS 61 FT730V holds 7.5 gal (28.4 L) of fuel; XE 610 SS holds 10 gal (37.9 L) of fuel, a 2.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- ZTS 61 FT730V cuts from 1.5 in (38 mm) to 5 in (127 mm); XE 610 SS cuts from 1.5 in (38 mm) to 4.3 in (108 mm). The cut-height range is the shortest and tallest cut the deck offers. Most lawns are kept well inside it.
- ZTS 61 FT730V has a published top speed of 10 mph; XE 610 SS has a published top speed of 9 mph, a 1 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
calculated figures and what isn’t comparable
Calculated by MowerFacts
- ZTS 61 FT730V works out to 4.9 acres/hour; XE 610 SS works out to 4.4 acres/hour, a 0.5 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Warranty: not published for ZTS 61 FT730V.
- Deck Construction: not published for XE 610 SS.
- Start Type: not published for XE 610 SS.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | ZTS 61 FT730V Wright · Commercial |
XE 610 SS Altoz · Commercial |
|---|---|---|
| List price | dealer quote | dealer quote |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Kawasaki | Kawasaki |
| Displacement | 44.3 ci (726 cc) | 44.3 ci (726 cc) |
| Engine Power | 24 hp | 24 hp |
| Cylinders | — | 2 |
| Engine Model | FT730V | FS |
| Fuel Type | Gasoline | Gasoline |
| Start Type | Electric | — |
| Deck | ||
| Cutting Width | 61 in (1549 mm) | 61 in (1549 mm) |
| Blades | 3 | 3 |
| Deck Material | 7 Gauge | Fabricated Steel |
| Deck Construction | Floating-side discharge | — |
| Deck Gauge | 7 | — |
| Anti-Scalp Rollers | — | Yes |
| Min Cut Height | 1.5 in (38 mm) | 1.5 in (38 mm) |
| Blade Tip Speed | — | 18501 ft/min (5639 m/min) |
| Max Cut Height | 5 in (127 mm) | 4.3 in (108 mm) |
| Drive | ||
| Transmission | Hydro | Hydrostatic |
| Ground Speed | 10 mph | 9 mph |
| Drive Tire Size | — | 22" |
| Reverse Speed | 4.5 mph | — |
| Dimensions | ||
| Weight | 1210 lbs (548.9 kg) | 970 lbs (440 kg) |
| Fuel Capacity | 7.5 gal (28.4 L) | 10 gal (37.9 L) |
| Length | 83 in (2108 mm) | 87 in (2210 mm) |
| General | ||
| Warranty | — | 3 yr |
Where these models differ, explained
ZTS 61 FT730V: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.
XE 610 SS: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — altoz.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.