Compare Mowers
List prices are the manufacturer’s published figures, re-checked daily; they exclude tax, freight and dealer setup.
A side-by-side reference of each model's stated specifications. MowerFacts doesn’t give opinions: where a published, spec-derived rule can separate machines we mark a Data Pick and show the rule; here, read the values and decide what fits your needs.
Best suited for
What each model is built for, from its duty class and key specs. This is a neutral reference — MowerFacts does not rank one model above another.
- Wright ZTS 61 FT730V — commercial: daily paid use and high acreage; 61-inch deck; gas powered
- Ferris ProCut S Front Mount Mower — commercial: daily paid use and high acreage; 61-inch deck; gas powered
What’s different? The 5 differences that matter most, from the published figures.
- ZTS 61 FT730V has a Floating-side discharge deck; ProCut S Front Mount Mower has a 10-gauge, Fabricated deck.
- ZTS 61 FT730V has a 7 Gauge deck; ProCut S Front Mount Mower has a 10-gauge, Fabricated deck.
- ZTS 61 FT730V has a published top speed of 10 mph; ProCut S Front Mount Mower has a published top speed of 8 mph, a 2 mph difference. Top speed is the maker's maximum in transport. Mowing speed is lower and depends on grass, terrain and the deck.
- ZTS 61 FT730V holds 7.5 gal (28.4 L) of fuel; ProCut S Front Mount Mower holds 6 gal (22.7 L) of fuel, a 1.5 gal difference. Tank size bounds how long a machine runs between stops. Consumption varies with engine, load and speed, so hours per tank are not fixed.
- ZTS 61 FT730V weighs 1,210 lbs (548.9 kg); ProCut S Front Mount Mower weighs 1,100 lbs (498.9 kg), a 110 lbs difference. Operating weight bears on trailer payload, ramps and soft turf. On its own it says nothing about build quality. What ZTS 61 FT730V's weight means for a trailer ›
1 more difference, calculated figures and what isn’t comparable
Other verified differences
- ZTS 61 FT730V has a 24 hp engine; ProCut S Front Mount Mower has a 23.5 hp engine, a 0.5 hp difference.
Calculated by MowerFacts
- ZTS 61 FT730V works out to 4.9 acres/hour; ProCut S Front Mount Mower works out to 3.9 acres/hour, a 1.0 acres/hour difference. Calculated by MowerFacts from deck width and the published top speed at 80% efficiency; it is not a manufacturer figure, and real mowing is slower.
Not comparable
- Warranty: not published for ZTS 61 FT730V.
- Blades: not published for ProCut S Front Mount Mower.
- Price: ZTS 61 FT730V is dealer quote only.
Verified means each manufacturer publishes the figure. A bigger number is only a bigger number; nothing here says which machine is better. The full specification table is below.
Which is faster on your property? › Measure your lawn once and MowerFacts times all 2 against it.
| Spec | ZTS 61 FT730V Wright · Commercial |
ProCut S Front Mount Mower Ferris · Commercial |
|---|---|---|
| List price | dealer quote | $11,768 |
| Engine | ||
| Power Source | gas | gas |
| Engine Make | Kawasaki | Kawasaki® FS730V |
| Displacement | 44.3 ci (726 cc) | 44.3 ci (726 cc) |
| Engine Power | 24 hp | 23.5 hp |
| Cylinders | — | 2 |
| Engine Model | FT730V | — |
| Fuel Type | Gasoline | Gas |
| Start Type | Electric | Electric |
| Deck | ||
| Cutting Width | 61 in (1549 mm) | 61 in (1549 mm) |
| Blades | 3 | — |
| Deck Material | 7 Gauge | 10-gauge, Fabricated |
| Deck Construction | Floating-side discharge | 10-gauge, Fabricated |
| Deck Gauge | 7 | 10 |
| Min Cut Height | 1.5 in (38 mm) | 1.5 in (38 mm) |
| Max Cut Height | 5 in (127 mm) | 5 in (127 mm) |
| Drive | ||
| Transmission | Hydro | Hydro pump and wheel motors with 7" cooling fans |
| Ground Speed | 10 mph | 8 mph |
| Reverse Speed | 4.5 mph | 4 mph |
| Dimensions | ||
| Weight | 1210 lbs (548.9 kg) | 1100 lbs (498.9 kg) |
| Fuel Capacity | 7.5 gal (28.4 L) | 6 gal (22.7 L) |
| Length | 83 in (2108 mm) | 115 in (2921 mm) |
| General | ||
| Warranty | — | 4 yr |
Where these models differ, explained
ZTS 61 FT730V: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — wrightmfg.com.
ProCut S Front Mount Mower: Specs verified against the manufacturer spec sheet on Jun 6, 2026 — ferrismowers.com.
Independent reference database. Specs compiled from manufacturer sources and normalized for comparison; verify with the manufacturer or dealer before purchase.